Customer
is responsible for unloading freight items from the delivery
truck. "Special delivery" requests must be addressed
before ordering and extra costs may be incurred for special delivery
options.
Challenger
Model VS10 Versymmetric Lift 10,000 Pound Capacity 2 Post
Lift
"Super
Sale!"
$4180.00
$2898.00
Delivered
The
VS10 features Challenger’s innovative Versymmetric®
Technology, providing technicians the versatility to lift
vehicles both symmetrically and asymmetrically within the
same service bay. With adjustable height and width
options, double telescoping screw pads, durable powder
coat finish, plated arm restraints and pins and many other
appealing features, the VS10 will accommodate the rigorous
demands of a full service facility and afford room to grow
with its reasonable cost.
Challenger
Warranty INFO At The Bottom Of The Page LINK
Order
any VS10 lift and get the adapter kit below for
only $189.00
(Save
$100.00 from our regular sale price, one kit per lift
purchased )
Click
to add kit to your lift purchase
(Order can also be placed by phone.
630-678-9010)
"Delivered"
Means
Shipped to
locations in lower 48 States to your business address or other location where
a semi-trailer truck can travel so you can unload it from the
truck. No Shipping Fees Charged
Versymmetric®
Technology facilitates increased efficiency and revenue. Why have to buy two different 10,000 pound capacity
lifts to lift both ways, when you can lift
symmetrically or asymmetrically with
Challenger's
Versymmetric capability?
3 stage
front arms provide greater arm sweep and access to
more vehicle pick-up points
Adjustable
height and width options when installing
Telescopic
screw pads adjust to multiple heights minimizing the
need for adapters
Rubber
pads minimize stress to vehicles with delicate undercoating
Padded
overhead shut-off system prevents vehicle damage
Single point
mechanical lock release
Wide
rubber door guards protect vehicle from door damage
Plated
arm restraints and arm pins inhibit rust and provide
long lasting durability
Standard
height available only
Imported
and Certified,
this lift kit receives
it's final assembly in Louisville Kentucky where an SPX
Fenner power unit is added, making it one of the most
beefy, well made 10k capacity lifts available compared with competitors
10k models. It weighs about 1800 lbs. in kit form, making it hundreds of pounds
heaver than most other comparable models
available.
Challenger
Factory Warranty
ALI
Certified
Challenger Lift
Sale Price $4180.00
$2898.00
DELIVERED
Note:
Pay by Check and receive a 2% discount, $2840.00
Delivered! CALL
630-678-9010 and Mail Check to address at this LINK
Here's
Even A Better Deal!
Buy
TWO VS10 Lifts Now, And Pay Only
$2875.00 Per Lift
Delivered!
Two
VS10 Lifts $5750.00 Delivered
Note:
Pay by Check and receive a 2% discount, $5635.00
Delivered! CALL
630-678-9010 and Mail Check to address at this LINK
Buy
SIX VS10 Lifts
For
$2635.00 Each Delivered!
Call
630-678-9010
New Style Challenger
Replacement Rubber Pads B2208
2
Six Inch
Extensions only, (NO organizer racks or other four
3" adapters) $140.00 Delivered
4
Three Inch
Extensions (only, no organizer racks or other adapters)
$170.00 Delivered
"Delivered"
Means
Shipped to
locations in lower 48 States to your business address or other location where
a semi-trailer truck can travel so you can unload it from the
truck. No Shipping Fees Charged
Vehicle
lifts will require a forklift or other means for
unloading at the Buyers location. Unloading the
truck is strictly the responsibility of the Buyer.
Trucking Companies call before delivering the equipment
and that is the time to coordinate your unloading schedule
with the driver that has the bill of lading with him. That
way you know exactly what he has that you will be
unloading and when.
Order
any CL10 Series lift and get the Height Adapter kit for
only $189.00
(Save
$100.00 from our regular list price,
one
kit per lift purchased) Click
to add kit to your lift purchase
(Order can also be placed by phone 630-678-9010)
Versymmetric
Technology Gives You The Advantage!
Call
Toll-Free 866-452-4563 for Discount Information
The arms on the
Versymmetric® 2-Post Lifts are
specially engineered to lift vehicles both symmetrically
and asymmetrically without jeopardizing safety or
product warranty. This offers technicians the
flexibility to service a larger variety of vehicles
increasing a service bays' revenue potential.
(Weighs about
2000 lbs. in kit form)
Standard
CL10 has 11' 8" Height
Minimum
ceiling height required 11'-11"
Note:
Pay by Check and receive a 2% discount, $3674.00
Delivered! CALL
630-678-9010 and Mail Check to address at this LINK
2
Foot Extended Height
CL10
has 13' 8" Height
SALE
$4079.00 Delivered!
COLOR BLUE
Note:
Pay by Check & get a 2% Discount
3
Foot Extended Height
CL10
has 14' 8" Height
SALE
$4159.00 Delivered!
COLOR BLUE
Note:
Pay by Check & get a 2% Discount
CL10
Features
NEW factory-installed Rubber Door
Guards protect vehicle doors from contacting columns
NEW Adjustable Arm Restraint
Shafts located on the bottom of the arm restraints. Adjust up and down
to compensate for uneven floors, floor tile, special floor coatings, etc.
NEW Grease Fittings on the arm pin
bushings minimize corrosion and keep arms swinging freely
Exclusive Versymmetric® Lifting Design,
Symmetric/Asymmetric 2 Lifts in One
Round
Telescopic Height Adjustable Pads (Same as VS10 Model
has)
Heavy-Duty pulley and cable equalization system,
CL-10
lifts have oversize 5" diameter cable pulleys.
Elongated carriage decreases load on bearings
CL10 offset 2-stage front arms
ALI/ETL certified to meet
current standard
Challenger
CL10V3
"The
Cream of the Crop"
10,000
Pound Lifting Capacity
"Versymmetric"
CL10 features
Innovation...
It's what sets Challenger Lifts apart from the rest of
the automotive lift industry.
Innovation is at the
heart of important technological advances like the
revolutionary Versymmetric® lifts...
and
now, the industry's
first 3-stage front and 3-stage rear arm two post lift.
Service
More Vehicles More Easily... and Make
More Money!
The
Challenger CL10V3 "The Cream of the Crop"
Versymmetric®
offset 3-Stage FRONT &
3-Stage
REAR arms
for maximum arm sweep. Reach
more "pick-up points" under smaller and larger
vehicles.
Versymmetric®
Technology facilitates increased efficiency and revenue
by providing the versatility to safely lift vehicles
symmetrically or asymmetrically within the same service
bay. Why have to buy two different 10,000 pound capacity
lifts in symmetric and asymmetric when you can lift both ways with
Challenger's Versymmetric capability?
Sale!
CL10V3
standard 11' 8" height $3889.00
Delivered
(Buy
2 CL10V3 lifts and get $25.00 off each lift, Save $50.00! Call
630-678-9010 to order)
CL10V3
Blue
color SALE!
Add
Dual Pendant Power Controls & Height Adaptor Kit (Part #10315),
Document Caddy (Part #10320)
and Pendant Holder (Part #10321)
Click
this button when ordering any CL10V3 lift to add this dual
control option... Dual Column
Controls $849.00
Sale!
CL10V3-2
TWO foot extended height
13' 8" height $4249.00
Delivered
Blue color
SALE!
Red color
SALE!
Add
Dual Pendant Power Controls & Height Adaptor Kit (Part #10315),
Document Caddy (Part #10320)
and Pendant Holder (Part #10321)
Click
this button when ordering any CL10V3 lift to add this dual
control option... Dual Column
Controls $
849.00
Sale!
CL10V3-3 THREE
foot extended height
14' 8" height $4329.00
Delivered
Blue color
SALE!-3
Red color SALE!
Order
any CL10V3 lift and get the adapter kit below
for
only $189.00
(Save
$
100.00 from our regular list price,
one kit per lift purchase)
(Order can also be placed by phone. 630-678-9010)
Optional
CL10V3 Truck Adapter Kit #10315
INCLUDES
• (4) 3” Stack
Adapters
• (2) 6” Stack
Adapters
• (2) Organizer Racks (withmounting
hardware)
Sale!
$312.00
$289.00 Delivered
2
Six Inch
Extensions only, (NO organizer racks or other four
3" adapters) $98.00 Delivered
4
Three Inch Extensions (only, no organizer racks or other
adapters)
$169.00 Delivered
Order
any E10 lift and get the 10315 truck adapter kit for
only $189.00
(Save
$100.00 from our regular sale price, one kit per lift
purchased )
Click
to add kit to your lift purchase
(Order can also be placed by phone.
630-678-9010)
"Symmetric"
CLFP9 Series
9,000
Pound Lifting Capacity
NEW
Challenger CLFP9 Low-Ceiling Model lift
Introducing the
CLFP9 a floor plate 9,000 pound capacity
lift with...
3-stage front and
3-stage rear arms!
For the shop that just doesn't have that 12 ft. ceiling, this
lift only requires 10' 1-7/8" high ceiling. In stock in red or
blue. Imported
and Certified,
this lift kit receives it's final assembly in Louisville
Kentucky where an SPX Fenner power unit is added to make
it one of the most dependable lifts available for
low-ceiling applications.
SALE!
$3159.00
Delivered
CLFP9 COLOR BLUE
NOTE:
If you pay by check instead of using a credit card, you can
deduct 2.0% credit card processing fee on any purchase on this
web page! Call us 630-678-9010
Free
Shipping For Lifts And Other Large Heavy Items To Commercial Business Addresses, Local
Shipping Terminals and Locations Accessible By Tractor
Trailer Truck. Customer Must Be Able To Offload
Equipment From Delivery Truck. Many Customers Buying For
Residential Use Pick-up Their Shipment At The Local Truck
Terminal In Their Area Especially If They Have No Means To
Offload Their Shipment From The Truck Trailer Or If the
Truck Can't Fit Down Their Street.
Shipping
free
to US locations in 48 lower States
Call
630-678-9010 Between 9AM and 5PM Mon. thru Fri. for Listings
NOTE: If you pay by check instead of using a credit card or paying
electronically, you can deduct 2.0% credit card processing fee on any purchase on this web
page.
Call for Info
630-678-9010
Challenger
Heavy Duty
Two-Post Lifts
E12 Heavy Duty Two Post Lift
SALE!
$4479.00
Delivered
The 12,000 lb. capacity E12 two post automotive lift provides symmetric lifting capability, maximum room to work underneath vehicles and room to grow. It’s adjustable height accommodates higher profile vehicles and provides ample headroom for day to day servicing.
Other features include Heavy Duty 2-stage telescoping arms, automatic arm restraints, rubber protective door guards, single point mechanical lock release system and padded overhead shut off system.
Available in Red and Blue.
The
heavy duty arms of the E12 have excellent reach and
retraction to access the designated lift points of heavier
commercial vehicles up to 12,000 lbs.
E12 two
post lift comes standard with stack
extension adapters to get underneath step rails and up to
the
truck's designated lift points.
Includes:
4
adjustable standard screw-type foot pads,
4
medium extensions,
2
high extensions (10315)
4
frame engaging adapters (10318)
and
adapter organizer.
10318
The columns
of the E12 two post truck lift can be assembled at 13'
10" or 14' 1/2" to accommodate higher profile
vehicles, providing ample headroom for technicians in
their day to day servicing.
Imported
and Certified,
this lift kit receives
it's final assembly in Louisville Kentucky where an SPX
Fenner power unit is added, making it one of the most
reasonably priced, Certified, 12,000 pound capacity lifts available compared with
our competitors 12k capacity models they have
available.
SALE!
$4479.00
Delivered
BLUE
COLOR E12
All
Lifts On this website are 220Volt Single Phase unless
otherwise specified
"Delivered"
Means
Shipped to
locations in lower 48 States to your business address or other location where
a semi-trailer truck can travel so you can unload it from the
truck. No Shipping Fees Charged
Challenger
Model
12000 12,000 lbs. lifting capacity13' 8" height
Click
image to see Brochure
Click
images for more INFO
CLICK for Features
Heavy Duty 2 Post Models
Available
Challenger
Lifts 12,000 lb. capacity 2-post lift features low
profile arms, padded overhead cut-off bar, adapter
accessories and much more. In fact, no other lift
company gives you more. Lifting capacity: 12,000 lb.;
rise height: 84-3/4"; height overall: 13' 8"; width
overall: 11'-10"; drive thru clearance:
104-1/2"; floor overhead switch: 13' 1"; arm
reach: 37" minimum; arm reach: 54" maximum;
screw pad height: 5" 6-3/4"; medium extension:
8" 9-3/4"; high extension:
11"-12-3/4"; inside columns: 114-1/2";
air supply required: 85-115 P.S.I.; 2-HP motor; 208-230
voltage; 60 second rise speed; ceiling height required:
13' 9".
Model
12001
12,000 lbs. lifting capacity
with 1 foot extension
78-1/8
In rise height
14' 8" height
Model 12002
12,000 lbs. lifting capacity
with 2 foot extension
78-1/8
In rise height
15' 8" height
Model
15000
15,000 lbs. lifting capacity
85-1/2
In rise height
14' 6" height
Model
15002
15,000 lbs. lifting capacity
with 2 foot extension
85-1/2
In rise height
16' 6" height
All
Heavy-Duty 2-Post Lifts are symmetric lifting and cable
equalized. Exclusive features include padded overhead
cut-off bar, heavy-duty adjustable rubber pad truck
adapters, just to name a few.
Two
post lift with single point air actuated lock release
Challenger
18000 Two-post Lift
Single point air actuated lock
release Allows technician to disengage both columns
simultaneously
Oversized steel pulley Reduces
stress on equalization system and provides increased
durability
60˝ lifting carriage
Lessens column stress by dispersing load
Standard combination stack
screw pads and storage brackets Accommodate a wide
range of vehicle pick up points
Padded overhead shut off system
Prevents vehicle damage from being raised too high
18,000 lbs. lifting capacity - 14' 6" height
(18000)
$14,649.00 Delivered!
(Model
18002)
Two
post lift with single point air actuated lock release
18,000 lbs. lifting capacity - 16' 6" height
with 2 foot extension
(18002)
$15,149.00
Delivered!
Model Number
18000
18002
Lift
Capacity*
18,000 lbs. (8165kg)
A
Rise Height1
85-1/2" (2172mm)
B
Height Overall
14' 6"
(4420mm)
16' 6"
(5029mm)
C
Width Overall
12' 10-3/4"
(3931mm)
D
Drive-Thru Clearance
106-3/4" (2711mm)
E
Floor to Overhead Switch
13' 11"
(4242mm)
15' 11"
(4851mm)
F
Arm Reach (Min)
38-1/2" (978mm)
G
Arm Reach (Max)
62" (1575mm)
H
Adj. Adapter Height2
6-1/4" /
8-1/2"
(159mm / 216mm)
I
Adj. Adapter Height2
(with medium extensions)
10-1/4" /
12-1/2"
(260mm / 318mm)
J
Adj. Adapter Height2
(with high extensions)
14-1/4" /
16-1/2"
(362mm / 419mm)
K
Inside Columns
120" (3048mm)
Air Supply Required
85 - 115 psi
Motor
3HP
Voltage (Single Phase
Standard)3
208v - 230v
Speed of Rise
80 seconds
Ceiling Height
Required
14' 7"
(4445mm)
16' 7"
(5055mm)
Challenger
Uses
SPX
Fenner Power Units!
Height
Extensions for Square 4X4 Spin-Up Style Adapters
Slip-on FIXED
Height
Extensions
For Challenger
Lifts with 4 X 4 Square Pads
CL-9,
Early CL-10, or E10 lifts
Includes The
Replaceable 4 X 4 Flat Rubber Pads
FOUR
10
inch
$219.00
for SET OF FOUR DELIVERED
TWO 10 inch
$155.00
for SET OF TWO DELIVERED
Slip-on
ADJUSTABLE Adapter Height
Extensions
For
Challenger
CL-9, CL-10,
E10 or VS10 lifts
With Square 4 X 4 Inch Challenger Rubber Pads
Set of FOUR
adjustable
from 4 to 6 inch extended height $279.00
Delivered
Column
Height Extension Kits
1'
and 2' Column Height Extension Kits For
"CL" Models Include hydro Hose and
Equalizer cables.
(Soon
to be available for VS10, E10 Models Also)
Easily
installed on two post lift for increased height
extension.
Vehicle Door Protectors
DoorjammerPRO
is preferred in top end shops across the country.
This thick pad is made of specially molded, impact resistant, heavy
duty polyurethane foam.
18
inch wide outside dimension
13.5
inch wide inside dimension
24
inches Tall
(Fits
most lift carriages & can be cut in half or trimmed to fit
the others)
DoorjammerPRO
is the hands down favorite in custom rod and specialty shops and
top new car dealerships.
Set
of Two $144.00 Delivered
Delivered!
Surface
Lift Power Station
SALE!
$229.00
Delivered
RED Power
Station
Black Power Station
Four
20 Amp GFCI protected electrical outlets mounted above
the F.R.L. to prevent moisture problems. (Like
the water problems that
are associated with some other brand units that have the
electrical receptacles on them mounted below
the F.R.L)This
Power Station Air System provides both
filtered / lubricated air and filtered
/ non-lubricated air
outlets. One for tire inflation and blow guns and one
lubricated outlet for pneumatic tool lubrication
purposes.
NOTE: If you pay by check instead of using a credit card or paying electronically, you can deduct 2.0% credit card processing fee on any purchase on this web
page. Call for Info 630-678-9010
Challenger
4 Post Lifts
Challenger
12,000 lb. Capacity
4-Post Automotive
Lift
"Super
Sale!"
4P12EFX
182.5 Inch Max.
W/Base $6500.00
Now $4500.00 Delivered
4P12XFX
210 Inch Max.
W/Base $6677.00
Now $4700.00 Delivered
Standard
Features & Benefits -
•
182-1/2 inch
max. wheelbase or 210 inch max. wheelbase models
to choose from.
•
78 inch raise
height, is the highest rise available in the industry
for maximum working space underneath the vehicles.
•
Louvered approach ramps for anti-skid tire traction.
•
Large solid machined steel cable pulleys extend the
life of the cable synchronization system.
•
Single point multi-position air lock release system.
RJ6 -
Rolling Jack 6000 lbs. lifting capacity for series
4P12 Series
Lifts Only
$1900.00
Each Delivered
Two RJ6
Rolling Jacks For $3700.00 (that's $1850.00 each)
"Delivered"
means Free Shipping
to USA locations in 48 lower States
For
4P12 & 4015 series four post lifts includes front radius
gages,
rear slip plates
& hardware.
40200-3D Bolt-on
alignment kit without radius gauges (4P12 & 4015 series
only)
3D alignment compatible $1529.00
Delivered
40200-3DBK Bolt-on
alignment kit including black "powder coat" radius
gauges
(4P12 & 4015 series only) 3D alignment compatible $1979.00
Delivered
40200-3DSS Bolt-on
alignment kit including "stainless steel" radius
gauges
(4P12 & 4015 series only) 3D alignment compatible $2159.00
Delivered
"Delivered"
means Free Shipping
to USA locations in 48 lower States
Free
Shipping For Lifts And Other Large Heavy Items To Commercial Business Addresses, Local
Shipping Terminals and Locations Accessible By Tractor
Trailer Truck. Customer Must Be Able To Offload
Equipment From Delivery Truck. Many Customers Buying For
Residential Use Pick-up Their Shipment At The Local Truck
Terminal In Their Area Especially If They Have No Means To
Offload Their Shipment From The Truck Trailer Or If the
Truck Can't Fit Down Their Street.
If
You Would Like Additional Info On Any
Specific Lift,
Call Us
630-678-9010 9AM To 5PM Central Time
Mon thru Fri
NOTE:
If you get the "phone lines are busy" message,
or we are out of the office and you get our
answering machine, please be patient and leave a message
anyway and we'll get back to you ASAP to help you
out.
w/
20" wide
runways, 272" Overall EL Extended Length
210
in max. wheelbase
Open
Front Models
4015EFO
$7049.00 Delivered!
Open-Front
General Service 4-post lift
w/
20" wide runways, 249" Overall Extended Length
182-1/2
in max. wheelbase
4015XFO
$7229.00
Delivered!
Open-Front
General Service 4-post lift
w/
20" wide
runways, 276" Overall EL Extended Length
210
in max. wheelbase
Challenger
Rolling Jack for 15K Capacity Lifts
RJ7.5
Rolling Jack
7,500 lb. capacity Rolling Jack features air/hydraulic
operation for 4015 series four post automotive lifts.
Broaden your service revenue with easy access to brakes
and wheels from underneath four post lifts. 7,500 lb.
capacity rolling jacks features adjustable width, low
vehicle drive-over clearance, stackable height extensions
with built-in storage rack and factory installed and
protected filter lubricator and regular.
SALE!$1995.00
each Delivered!
RJ7.5
Rolling Jack For Series 4015 Series
Lifts Only
Two
RJ7.5
Rolling Jacks For $3920.00 (that's $1960.00 each)
"Delivered"
means Free Shipping
to USA locations in 48 lower States
Professional
Alignment
Racks
79" - The Highest Rise
Height In The Vehicle Lift Industry
TWO
7,500 Pound Capacity Rolling Jacks Included With Each
Alignment Rack At No Extra Cost!
All “closed-front” alignment racks include 2 rolling
jacks (7,500 lbs. lifting capacity) 2 flush mount
stainless steel turning radius gauges, internal air-line
kit, built-in rear stainless steel slip plates and 2
multi-position work steps. Optional 3 phase electrical
also available at additional cost.
Closed
Front Models
(AR4015EAX)
$15,519.00 Delivered!
182-1/2
in max. wheelbase
(AR4015XAX)
$15,789.00 Delivered!
210
in max. wheelbase
Open
Front Models
(AR4015EAO)
$16,395.00 Delivered!
182-1/2
in max. wheelbase
(AR4015XAO)
$16,559.00 Delivered!
210
in max. wheelbase
All
“open-front” alignment racks include 2 rolling jacks
(7,500 lbs. lifting capacity) 2 flush mount stainless
steel turning radius gauges, internal air-line kit,
built-in rear stainless steel slip plates and 2
multi-position work steps. Optional 3 phase electrical
also available at additional cost.
TWO
6,000 Pound Capacity Rolling Jacks Included With Each of
the above Alignment
Packages At No Extra Cost!
Professional
Quick Lube Rack
Challenger Lifts' lube racks systems offer the best solution for high volume oil change services. Using an electric/hydraulic drive system, these lube racks use heavy-duty chain for
lifting and equalization, as well as a single point mechanical lock release system is continuously engaged for safety. All lube racks include a non-skid diamond plate textured
runways, built-in internal track on runways to accommodate sliding oil drain pans (sold separately) and other accessories.
"MADE IN
THE USA"
Quick Lube Model available
in: 12,000 lbs. lifting capacity - 21' or 23'
10" overall length - 22" runways (44012LR)
(44012LR)
$14,859.00 Delivered!
Allow approx. 6 to
8 weeks for manufacturing & delivery
Quick
Lube-Rack "Drive-Thru Ramp Kit"
TWO
RAMPS Per kit
44RK12
$659.00
Drive-Thru
Ramps
Ever
wanted to start a Quick-Lube Business? We can help you
with lifts, tanks, oil pumps, oil reels, meters &
your financing!
630-678-9010
Financing
Available For Start-Ups & Established Businesses!
DUAL-LUBE
RACK
by
WHIP available too!
$$$
Save Thousands $$$
Call
630-678-9010
Exclusive
features on Challengers Quick Lube Rack include walkways, handrails, front gate,
moving ladder with wheels, diamond plated
ramps and runways to minimize slipping, etc.
Quick
Lube-Rack "Oil Drain Pan
Kit"
Model 10267
One
Pan Per kit, Oil
drain pan kit - adjustable width 38 - 45" with 32
gallon capacity (44012LR/DLR, 4P12series,
4015 series, 44018 series, 44030 series,
For Fitting Two Racks In
Smaller Area and saving time working on 2 vehicles. Twin
Lube Racks, "Siamese-Style"
sharing center catwalk between the two. One Technician
can alternately work on both vehicles on raised racks
without climbing up and down access stairways. Great for
Quick Lube Shops that want to save time and complete
jobs more efficiently!
Model#
44012DLR $31,598.00 Delivered!
Allow approx. 6 to
8 weeks for manufacturing & delivery
Customer
is responsible for unloading freight items from the delivery
truck. Special delivery requests must be addressed when order
is placed and extra costs may be incurred for special delivery
options.
Contact
Us For Info...
Call
630-678-9010 between
9 AM & 5 PM (Central
Time) Weekdays. If you get the "Our
phone lines are busy" message please leave your phone
number
and we'll call you
back ASAP to help you.
Free
Shipping For Lifts And Other Large Heavy Items To Commercial Business Addresses, Local
Shipping Terminals and Locations Accessible By Tractor
Trailer Truck. Customer Must Be Able To Offload
Equipment From Delivery Truck. Many Customers Buying For
Residential Use Pick-up Their Shipment At The Local Truck
Terminal In Their Area Especially If They Have No Means To
Offload Their Shipment From The Truck Trailer Or If the
Truck Can't Fit Down Their Street.
Shipping
free
to US locations in 48 lower States
PROFESSIONAL
MEDIUM & HEAVY DUTY 4 POST SURFACE MOUNT LIFTS
Chain
Lifting HD 4 Post Lifts
All Heavy Duty
4-Post Lifts use a mechanical/electrical drive system
with a heavy-duty chain for lifting and equalization.
Exclusive features
includes recessed turning radius gauge cutouts,
concealed retractable work platforms, wheel curbs on the
inside of runways. Optional rolling jacks and
turntables also available.
All
models (excluding alignment racks) include a non-skid
diamond plate texturedrunways,
built-in internal track on runways to accommodate
rolling air jacks, oil drain pans and other accessories.
Challenger
Warranty INFO At The Bottom Of The Page LINK
18,000
pound capacity
18,000 lbs. lifting capacity
-
194 in. Max
Wheelbase,
21' 4" long 22" wide runways,
256 in. overall length
Model 44018
$8895.00
Delivered!
18,000 lbs. lifting capacity - 230 in. Max
Wheelbase, 292 in. overall length
$9895.00
Delivered!
Alignment Rack Model Available
18,000 lb. lifting capacity
236
in Max Wheelbase- Alignment
Rack w/22" wide runways, 17 level locking heights,
dual cut outs for turning radius gauges, and built
in rear slip plates. 4 Wheel alignment
98"-206" Max 2 Wheel alignment 220". Single point air actuated lock release. Radius
gauges not included.
Air/hydraulic rolling jack - adjustable width
(36-52")
9,000 lbs. capacity for 44018AR.
$2796.00 Each Delivered
Turntables
for 4P12, 4015 series and 44018AR alignment racks
Two
#10500 Powder coated gauges $898.00
Delivered
10500
Two
#10500SS Stainless steel gauges $998.00 Delivered
10500SS
Challenger 30,000 to 60,000
Lb. Capacity 4-Post Lifts
Challenger
Lifts heavy duty 44030 4 post automotive lift features a
superior lifting system with dual hydraulic lift chains
and sealed roller bearings for maximum reliability. The
heavy duty hydraulic cylinder provides optimum lifting
with minimum maintenance, to lift heavy trucks weighing
up to 30,000 lbs.
Call
Toll-Free 866-452-4563 for Discount Information
30,000 lbs. lifting capacity -
230 in Max
Wheelbase - 24" wide runways
Model 44030$12,988.00 Delivered
30,000 lbs. lifting capacity -
290 in Max
Wheelbase - 24" wide runways
Model 44030E$15,589.00 Delivered
30,000 lbs. lifting capacity -
350 in Max
Wheelbase - 24" wide runways
Model 44030X$17,395.00 Delivered
40,000 lbs. lifting capacity -
310 in Max
Wheelbase - 32" wide runways
Model 44040 Call for quote
40,000 lbs. lifting capacity -
370 in Max
Wheelbase - 32" wide runways
Model 44040E
40,000 lbs. lifting capacity -
430 in Max
Wheelbase - 32" wide runways
Model 44040X
50,000 lbs. lifting capacity -
310 in Max
Wheelbase - 32" wide runways
Model 44050
Challenger
makes more 50 and 60 thousand pound capacity lifts too,
give us a call!
Challenger’s 1,750 lb. capacity motorcycle/ATV/UTV lift is perfect for anyone who owns and works on motorcycles, ATVs or utility vehicles (requires optional CLML02SP side panel extended platform). Dual foot pedal air controls makes this lift safe and easy for anyone to operate.
CL1750A also comes standard with a 45" diamond plate approach ramp making it safe and easy to load and unload your bike.
Challenger's motorcycle lift takes up little space, features seamless lift and lower functions, and makes quick work of motorcycle,
ATV and UTV service repairs.
Optional wheel clamps, center jacks, and extensions provides the complete motorsports service application. Available in black only.
CL1750A motorcycle, ATV and UTV lifts are available in black only.
Challenger's
MR6,
a 6,000 lb. capacity portable "Mid-Rise" automotive lift
features an increased rise of 53-1/4". The MR6 comes
standard with 4 adjustable screw-type adapters to lift
higher frame vehicles. It is easily moved around with
its tow dolly for flexibility in servicing vehicles,
inside or outside.
MR6
$2,098.00 Delivered!
MR6
Features and Benefits
Portable mid rise lift
with heavy duty tow-dolly provides flexibility to
service vehicles anywhere, inside or outside &
provides convenience and ease of maneuverability!
Seven locking
positions allow Mechanic to work at comfortable height
to increase productivity and minimize fatigue.
Electric/Hydraulic SPX
Fenner power unit (SPX made in the USA) mounted right
on the towing dolly. Push
button to raise lift & convenient push style
lowering handle for lowering lift.
Slip on rubber pad
adapter kit with height extension accommodates high
profile vehicles
Lifting capacity:
6,000 lbs.
Rise height:
53-1/4"
Length overall:
7'-10"
Width overall:
39-1/2"
Minimum folded height:
5-1/2"
Pad height (minimum):
8-1/16"
Pad height (maximum):
56-5/16"
45 second rise speed
This
Portable Mid Rise Lift is a great way to increase the
productivity in a busy shop. It's like having a service
bay anywhere you want... indoors or out. The power unit is
conveniently mounted to a heavy-duty towing dolly, making
it easy to move and operate this lift. Exclusive features
include a sliding/rotating arm design with rubber pads and
low drive over clearance. This lift can be slid under a vehicle
if you can't move the vehicle to a lift. The MR6 has
4 high-adapters & 4 low-adapters, 12 foot hydraulic
hose, Electric/hydraulic power unit with 1-HP / 115 volt
motor. Minimum recommended bay size is 10' x 22' or
anywhere outside where you safely have room to work.
Customer
is responsible for unloading freight items from the delivery
truck. Special delivery requests must be addressed before
ordering and extra costs may be incurred for special delivery
options.
The
SRM10 is an ideal addition to any shop that performs brake
and tire service. This 10,000 lb capacity
short-rise lift comes standard with built-in lug nut
trays conveniently located in the base of the lift for
quick efficient service. Price includes 4 steel spotting
blocks with rubber pads.
The
SRM10 has a 22 inch lifting height.
NOTE: If you pay by check instead of using a credit card or paying electronically, you can deduct 2.0% credit card processing fee on any purchase on this web
page. Call for Info 630-678-9010
Challenger
EnviroLift Series
Cassette-Style
In-ground Lifts
Introducing
a lifting solution as clear as water!
Challenger
AV1020WV
10,000
Pound Lifting Capacity
CLICK
TO GET THE BIG PICTURE
10,000 POUND CAPACITY
"EnviroLift"
with AquaVantage uses water instead of hydraulic oil
and
compressed air as it's operating force, making it the most environmentally
friendly automotive lift on the market...
a
RealGreen Product! Another
Challenger Exclusive Innovation.
The AV1020WV
works with no environmental, maintenance and corrosion
problems you may have encountered with traditional
hydraulic oil operated in-ground lifts.
And since it's powered by
the air pressure you already have, there are no power
units to maintain, another substantial cost savings.
The
AV1020WV runs on your shops existing compressed air, and tap water straight out
of your shops faucet.
The
moment you see it's gleaming 8-1/4 inch diameter pistons rise from the floor,
you'll understand why it's a better solution to lifting
vehicles. It's
advantages are as clear as water...
The lifting mechanisms are service
accessible from the surface and require minimal
maintenance - simply grease four fittings once a year.
CALL
FOR QUOTE
Other Features and Benefits:
Large
8-1/4" double walled, anodized aluminum pistons
provide solid stability, corrosion-resistance and a stunning
showroom-like appearance
Air
actuated water control valve for smooth lifting and
lowering of vehicles.
The
highest rise in the industry at 80" provides
maximum head room for working underneath vehicles.
Versymmetric®
3-stage arms lift both symmetrically and
asymmetrically within the same service bay to maximize
service capabilities and revenue potential.
Widest
drive-thru in the industry at 87" allows easy
vehicle positioning.
Double
Telescopic Screw Pads reach multiple vehicle pickup
point heights reducing the need for height adapters.
Challenger
Warranty INFO At The Bottom Of The Page LINK
Challenger
Uses
SPX
Fenner Power Units!
NOTE: If you pay by check instead of using a credit card or paying electronically, you can deduct 2.0% credit card processing fee on any purchase on this web
page. Call for Info 630-678-9010
Challenger
EV1520
15,000
Pound Lifting Capacity
2-post
in-ground lift
"Made In
Louisville Kentucky"
Challenger
EV1520
Shipping
free
to US locations in 48 lower States
GLOBE
LIFTS
Proven
Dependability!
GLOBE
Single Post
Low-Pressure
Lift
GLOBE
FS-10 (Was
$5379.00)
NOW
$5249.00 Delivered
Note:
Pay by Check and receive a 2%
Card
Processing Fee Discount, $5144.00 Delivered!
CALL
630-678-9010 and Mail Check to address at this LINK
Specifications:
Capacity: 8,000 lbs. (2,000 lbs. per Adapter)
Operation: “AS” = Semi-Hydraulic
Rise: 72”
Stroke: 68”
Displacement: 26 gallons
Initial Fill: 40 gallons
Cylinder: 10-5/8” Diameter
Superstructure: Solid Steel Bolster-Style and Low Profile Swing Arms
Adapters: Ductile Iron, 4-Position Adjustable on Sliding Sleeves
Low Oil Control and Auto Lock Leg: Supplied in Accordance with ANSI B153.1 Specifications
Reversible Sleeves for
"Close Encounters"
GLOBE
FOUR POSITION ADAPTERS
GLOBE
FSR-28 2-Post Lift Kit
GLOBE
MODEL FSR-28
Low-pressure
uses your shop compressed air over hydraulic oil to
operate. Simplicity at its finest, tried and true design
professional duty lift.
Nothing
outperforms or costs less to operate than a low-pressure
in-ground lift. Only one moving part per cylinder.
Features:
• Fiberglass Coated Cylinders for Long Lifetime •
Solid Steel Arms (1-1/2 inch Thick) and Solid Steel Superstructures (Not
hollow welded plate assembly) •
Replaceable Upper Cylinder Bearing & Pistons For Long Life &
Future Reparability • Multi-Position
Height Safety Lock Mechanism •
Four Position Flip-Up Adapters & Optional Height Extensions Permit
Varying Heights For Accessibility • Oil Control Valve
Allows Precision Lift Height Adjustment (Varying Height
For Brake & Tire Service) • 77-1/2”
Drive-Thru Width Allows Ample Tire Clearance For Safe, Sure Vehicle Spotting • Reversible Superstructures & Arm Sleeves For Greater Lifting Versatility
Oil
Tank, Oil Valve & Air Valve Included
8,000
Pound capacity (2000 Lbs. per adapter)
(Upgradeable
to 12,000 capacity with the optional upgrade kit below.)
Only
$6460.00 Delivered!
Note:
Pay by Company Check and receive a 2% processing fee discount,
$6330.00
Delivered!
Call 630-678-9010 between 9 AM & 5 PM (Central
Time) Mon thru Fri.
Challengers
Limited Factory Warranty, Compare
It To Other Manufacturer's Product Warranty &
Challenger Comes Out On Top!
NOTE:
WARRANTY CARD MUST BE COMPLETED AND RETURNED OR REGISTERED ON THE CHALLENGER WEBSITE ( ATLINK)ASAP
AFTER INSTALLATION TO VALIDATE THE WARRANTY.
All
Challenger Lifts are warranted to the original owner,
from the date of invoice, as described below:
Product Line
Parts
Labor,
Mileage & Freight
2 Post
CL9 / CL10 / CL10V3 / CLFP9
2 Years
1 Year
2 Post
VS10
1 Year
1 Year
2 Post
E10
1 Year
1
Year
2 Post
12000 / 15000 / 18000
2 Years
1 Year
4 Post
40 Series / 44000
2 Years
1 Year
4Post
44018 / 25 / 30 / 40 / 50 / 60 / 80
1 Year
1 Year
Rolling Jacks
RJ6 / SAJ
1 Year
1 Year
Short & Mid Rise
SRM10 / MR6
1 Year
1 Year
Cassettes
CS Series
2 Years
1 Year
Power Stations
90 Days
None
Accessories & Purchased Parts
90 Days
None
See
the Limited Warranty Statement included with
lift kit for full terms and conditions.
(1)
Filter, Lubricator & Regulators (FLR) shipped as part of the Rolling Jacks are
warranted for the same period as the Rolling Jack, as long as the FLR is not contaminated
by wet or dirty air.
•
See Warranty Statement Included with Lift Kit For More Specific Details.
NOTE: If you pay by check instead of using a credit card,
or paying electronically, you can deduct 2.0% credit card
processing fee on any purchase on this web
page.
Call 630-678-9010 for Info
If
You Would Like Additional Information On Any
Specific Product Or Part,you
can call us 630-678-9010 between 9 AM & 5 PM (Central
Time) Mon-Fri. and Smitty's will get your
Quote or information to you ASAP
Smitty's
Equipment Sales & Service
1705
W. Armitage Court
Addison,
IL. 60101
1-630-678-9010
"Accredited
Member of the Better Business Bureau"
NOTE:
If you pay by check instead of using a credit card
or
paying from our website, you can deduct 2.0% credit card
processing
fee on any purchase on this web page.
Call
for Info 630-678-9010 and Mail your check to the address below.
10318
Model 10267
GLOBE
FS-10 (Was
