When purchasing from our website no credit card
information is saved and no Customer information is shared
with any third party other than our credit card processing
company.
You
Can Order Any
Item By Phone Too, Just Call 630-678-9010
2%
Discount when purchasing by check instead of credit card INFO
LINK
NOTE!
Delivered prices shown on this page are to Commercial
addresses only.
Call
for Residential Delivery Surcharge. 630-678-9010
QFP09
Two Post Vehicle Lift. (Great
for Low-Ceiling Conditions)
9,000 lb Capacity
2-Post Floor-Plate Style Lift
Ceiling Height Required:
Only 10' 1-7/8"
Lifting Capacity: 9,000 lb.
Max Load per Arm: 2,250 lb.
Rise Height: 79-1/2"
Drive Thru Clearance: 98-3/16"
Width
Inside Columns: 109"
Column Height: 10' 7/8"
Front Arm Reach: 24-1/2" to 44-1/2"
Rear Arm Reach: 24-1/2" to 44-1/2"
Screw Pad Height: 3-7/8" to 7-1/8"
Blue
Powder- Coat Paint Finish
Motor: 2 HP
Voltage Single Phase: 208-230v
Max Load Capacity Per Arm: 2,500 lb.
Rise Height of 78.75" Provides Excellent Clearance Underneath
Height Overall: 12' 1/2" or 11' 5-1/2"
Width Overall: 131-3/4"
Drive Thru Clearance: 98-3/8"
Padded Over-Height Safety Bar Automatically Shuts Off
Motor
Floor to Over-Height Limit Bar: 11' 8-1/2" or 10' 10-1/2"
3-Stage Front Arms and 2-Stage Rear Arms.
Symmetric or Asymmetric Lifting.
Front Arm Reach: 21-3/4" to 39- 1/4"
Rear Arm Reach: 38-1/4" to 55-3/8"
Double Telescoping Screw Pads.
Optional Drop In Truck Adapters
Screw Pad Height: 4" to 7-1/2"
Inside Columns: 110-1/4"
Steel Pulleys for Long Life
Single Point Lock Release Mechanism
Rubber Vehicle Door Protectors
Blue Powder-Coat Paint Finish
Motor: 2 HP
Voltage Single Phase: 208-230v Standard
Q10 2-Post Lift
$2749.00 Delivered
Note:
Pay by Check and receive a 2% discount, $2694.00
Delivered!
CALL
630-678-9010 and Mail Check to address at this LINK
Order
any Q10 lift and get the 10315 adapter kit for only
$169.00
(Save
$100.00 from our regular sale price, one kit per lift
purchased )
Q2P10EH2
2' Overhead Extension Kit for Q10
Provides 2' Extra Overhead Clearance,
Stand Alone Kit for New or Existing Q10 Lifts.
Excellent clearance for Box Trucks, Ladder/Roof Racks, and High Top Service Vans.
$289.00
Delivered
Q12
Two Post Vehicle Lift
12,000 lb Capacity 2-Post Lift
ALI / ETL Certified Lift
Ceiling Height Required: 14' 8"
Lifting Capacity: 12,000 lb.
Max Load Capacity Per Arm: 3,000 lb.
Rise Height: 80" Provides Excellent Clearance Underneath
for Technician
Height Overall: 14'7" or 13' 10"
Width Overall: 137 3/4"
Drive Thru Clearance: 101"
Rubber Door Protectors
Padded Over-Height Safety Bar Automatically Shuts Off
Motor Floor to Over-Height
Limit Bar: 14' 4" or 13' 7" 2-Stage Front and Rear Arms for Symmetric Lifting
Front Arm Reach:31-13/16" to 54-11/16"
Rear Arm Reach: 31-13/16" to 54-11/16"
Single Threaded Spin-Up Adapters & Square Rubber Arm Pads
Screw Pad Height: 5" to 9"
Inside Columns: 114-9/16"
Steel Pulleys for Long Life
Single Point Lock Release Mechanism
Rubber
Vehicle Door Protectors
Blue Powder-Coat Paint Finish
Motor: 2 HP
Voltage Single Phase: 208-230v
Note:
Pay by Check and receive a 2% discount, $3820.00
Delivered!
CALL
630-678-9010 and Mail Check to address at this LINK
Order
any Q12 lift and get the 10315 adapter kit for only
$169.00
(Save
$100.00 from our regular sale price, one kit per lift
purchased )
Click
to add kit to your lift purchase
(Order
can also be placed by phone 630-678-9010)
COLUMN
HEIGHT EXTENSION KIT FOR Q12
Q2P12EH2
2' Overhead Extension Kit for Q12
Provides 2' Extra Overhead Clearance
Stand Alone Kit for New or Existing Q12 Lifts.
For New or Existing Q12 Lifts.
Excellent Clearance Addition for Box Trucks, Ladder/Roof Racks and High Top Service Vans.
$439.00
Delivered
QUALITY
TWO-POST LIFT ACCESSORIES
New Style Quality
Lift Rubber Pads
Press Over the
Adapter Style ( Old style pads available at this LINK)
10318
U-Shaped Adapter Kit for Q10, Q12 & QFP09
4 Frame Engaging Adapters
Excellent for Truck Lifting
Can be used alone or along with the 10315 Height
Extension Kit (above)
Set
of TWO $189.00
Delivered
10314
Set
of FOUR $349.00
Delivered
10318
HD Adjustable Truck Adapter
Heavy Duty
Adapter fits 2-3/8 inch diameter nesting hole
$79.00
Delivered
B12062-12
QUALITY
4-POST VEHICLE LIFTS
Home Storage / Light Duty
Service 4-Post
SALE!
Q4P09H
4-Post Lift $2998.00 Delivered
ALI/ETL
Certified Lift
Simply the Best Car
Lift for the Money
Utilizes Our
Commercial Grade Design
Fits in Standard
Garage
Manual Locks - No
Air Required
9,000
lb Lifting Capacity
Free Standing or
Bolt-down Option. Portable with Q4P09CS Caster
Set.
Formed Runways with
Rail System. Supports Optional QRJ04H Rolling
Jack, Q4P09JT Jack Tray, or Q4P09DT Drip Tray Set.
Single Hydraulic
Cylinder
Commercial Grade
cables - 1/2"
Adjustable Internal
Lock System
Secondary Lock
Mechanism
Full Size Columns -
No Exposed Cables
Oversized Slider
Blocks for Smooth Operation and Stability
Rise height
underneath runway - 68"
Outside to Outside
Columns - 106"
Overall length
(with ramps attached) - 211"
Inside columns -
95"
Height of columns -
86"
Width of runways -
20"
Height of Runway -
5"
Width between
runways - 38"
Length of runways -
164"
Detachable aluminum
approach ramp length - 36"
14 lock positions
Pre-assembled Lock
Mechanism
1HP 110 Volt
Plug-in or 220v Power
Home
Storage and Light Duty 4 Post Accessories
Call
630-678-9010 for discounted pricing if accessories are
purchased at time of lift purchase.
Caster
Set (set of 4 casters and hardware) used to make
Q4P09H portable.
Q4P09CS
$295.00
Delivered
4,500
lbs capacity Jack Tray. Cost effective wheel’s
free service option when used with bottle jacks (Not
included but available LINK)
Q4P09JT
$195.00
Delivered
Q4P09DT
Drip
Tray Set (set of 3)
$229.00
Delivered
Aluminum
Storage Platform Set (set of 4).
Each unit has
capacity to 1,000 lbs. Excellent to turn Q4P09H into
a complete garage storage unit.
Q4P09SP
$1029.00
Delivered
Q4P09ER
(Stand alone)
Aluminum
Extended Ramp (set of 2) 50” in length for low profile
vehicles. Sold separate from lift or as an
accessory.
$529.00
Delivered
Steel
Bolt-On Pivoting Ramp (set of 2)
Fits all home
storage models. Great for cost conscious service
applications such as import car service, drive-thru
lube bays, restoration or body shops where storage
is not a concern.
Can
be purchased as not cost upgrade with lift (see lift
section) Also can be used to provide Q4P12E/X with
drive-thru option.
Q4P09PR
(Stand alone)
$389.00
Delivered
Q4P09SR
(Stand alone)
Standard
Aluminum Ramp (set of 2) 36”
Sold
separate from lift or as an accessory.
$389.00
Delivered
10267
Oil
Drain Pan. Adjustable width for Q4P12E & X
series
$879.00
Delivered
Internal
Airline Kit for Dual Rolling Jack operation for
Q4P12E
40230-E
$395.00
Delivered
Internal
Airline Kit for Dual Rolling Jack operation for
Q4P12X
40230-X
$395.00
Delivered
Ramp
Kit - 48” long - for low profile vehicles for
Q4P12E/X Series
10266-L
$789.00
Delivered
Call
630-678-9010 for discounted pricing if accessories are
purchased at time of lift purchase.
Q4P12E
Four Post Drive-On Lift - 12,000 Pound Capacity
ALI/ETL Certified
Surface mounted 4-Post Lift
General Service Auto / Truck Lift
Commercial Grade Design
Air Operated Locking Latch System
(Air Supply Required: 85-120 psi)
Secondary
Safety Lock System
Adjustable
Locking Latch Mechanisms for Leveling Runways
Rise Height: 78" (To Top of Runway) Length Overall:
244-1/2" (including approach ramps) Maximum Wheelbase:
182"
Width Overall: 130-3/4"
Inside of Columns: 116"
Between Columns: 196"
Height of Columns 90-1/2"
Height of Runways: 7"
Width of Runways: 20"
Motor:
2 HP
Voltage Single Phase: 208-230v
Speed of Rise: Approximately 70 Seconds Blue
Powder- Coat Paint Finish
Optional Rolling Jack
(Shown in Image) & Available Below
Optional Kit for Alignment Lift Available Below
Optional Approach Ramps for Drive-Thru Capability
Available Below
Q4P12E
4-Post Lift $4349.00 Delivered
Q4P12X Extended Length
12,000 lb Capacity 4-Post Lift
ALI/ETL Certified
Surface mounted 4-Post Lift
Extended Length Runways
General Service Auto / Truck Lift
Commercial Grade Design
Air Operated Locking Latch System
(Air Supply Required: 85-120 psi)
Secondary
Safety Lock System
Adjustable
Locking Latch Mechanisms for Leveling Runways
Rise Height: 78" (To Top of Runway) Length Overall: 272"
(including approach ramps) Max Wheelbase: 210"
Width Overall: 130-3/4"
Inside of Columns: 116"
Height of Runways: 7"
Height of Columns 90-1/2"
Width of Runways: 20"
Motor:
2 HP
Voltage Single Phase: 208-230v
Speed of Rise: Approximately 70 Seconds
Optional Rolling Jack
(Shown in Image) & Available Below
Optional Kit for Alignment Lift Available Below
Optional Approach Ramps for Drive-Thru Capability
Available Below
Q4P12X
4-Post Lift $4489.00 Delivered
Q4P12E
& Q4P12X Available Optional Items
Optional Alignment Kit for Q4P12E or Q4P12X Q4P12AK Alignment Kit
Optional Bolt-On Alignment
Kit Turns the Q4P12E into a Wheel Alignment Rack.
Raises Entire Level of Runway for Level 3D 4-Wheel Drive Compatible Rack.
Integrated Rear Slip Plates.
One Set of Two Front Turn-plates Standard.
Does NOT Include Optional Rolling Jack shown, and must
be purchased separately.
Photo Shows Multiple Radius Gauge Locations - Illustrating the
Possible Positions Available for Different Length
Vehicles.
Blue
Powder- Coat Paint Finish Must be ordered with Q4P12E or
Q4P12X Four-Post Lift.
Q4P12AK
Alignment Kit $1798.00 Delivered
Q4P12AK-SS
Alignment Kit $2098.00 Delivered
Same
as above but with Stainless Steel Slip-Plates &
Turntables
QRJ06A
6,000 lb Capacity Rolling Jack
Air Powered Hydraulic Operation
2-Position Mechanical Locks
Adjustable Width Roller Brackets
Standard 3" Adapter Extensions Included
Adapters rise above runway from 3-3/8" to 15-3/8"
Spring supported rollers allow easy movement when
positioning while unloaded. Then the jack becomes stable
on solid steel mounting when a load is applied to it.
QRJ06A
Alignment Kit $1698.00 Delivered
MOTORCYCLE
& ATV lifts
CLICK TO ENLARGE IMAGE
QUALITY LIFT Motorcycle/ATV
Lift
1,000 lb Capacity.
Air Operated.
Precision construction
and integrated base provides extra stability and
reliability.
Dual foot pedal
operation makes for easy and safe operation.
Rear drop panel and
approach ramps are standard.
Max raised height -
35"
Lowered height -
7.25"
Platform width -
24"
Platform length -
84"
Air supply required
85-115 psi
Shown with optional wheel clamp, center jack and shop dolly.
$1285.00 Delivered
Motorcycle/UTV
Lift QML02E
2,000 lb Capacity Elec/Hydraulic Lift.
Precision formed
platforms and arms.
Integrated base frame
for stability and smooth operation.
Multiple lock
positions.
Front and rear drop
panels.
Solid approach ramps
standard
Max rasied height -
35"
Lowered height -
7.5"
Platform width -
29.5"
Platform length -
86.5"
Electric/Hydraulic
Power Unit - 110v
Motorcycle shown with
optional deluxe wheel clamp and center jacks.
UTV option shown with optional center jack.
$1998.00 Delivered
Quality Lift Warranty Information
• Quality Lift warranties to the original owner all products against manufacturing and material defects.
The warranty period is for 12 months from date of invoice for Lifts and Shop Equipment. Parts and Accessories are
warranted for 90 days from date of invoice.
Quality Lifts will either repair or replace, at Quality Lifts discretion, the defective product.
All warranty must be approved by Quality Lifts in advance.
An RMA # will be given for all labor
and returned components. Quality Lifts shall pay for reasonable cost of outgoing transportation and labor. When requested, the customer must return the product/part at their cost for inspection for credit to warranty.
• This warranty is not applicable unless the product is installed, operated, and maintained in accordance with the operations manual. This warranty does not cover consumable components, negligence, unauthorized alterations,
improper operation, or misuse.
• For Lifts, except where noted, a limited 1 year warranty for parts and labor is applicable. The warranty is valid only if a lift warranty registration card is returned. For the labor warranty, the lift must be installed by an authorized
installer. Quality Lifts will use authorized service partners to conduct any approved service work. A RMA # must be given before any part return, repair, or labor service can be conducted.
• For Shop Equipment, the limited 1 year warranty covers reasonable repair and replacement. Customers are required to call Quality Lifts for a RMA # prior to repair. Quality Lifts will use authorized service partners to conduct
any approved service work. Quality Lifts will cover the cost of the repair and return freight.
NOTE:
If you pay by check instead of using a credit card
or
paying from our website, you can deduct 2.0% credit card
processing
fee on any purchase on this web page.
Call
for Info 630-678-9010 and Mail your check to the address below.
Q2P10EH2 
Q2P12EH2 
10315 
10318 
Q4P12X 
