Email
or Call us
at 866-452-4563 for free repair advice before ordering parts you're not
very accustomed to. We're available most of the day
specifically for that reason. We may just save you some
time and money as well!
Please keep
in mind that we are only going to sell you parts that you
specifically approved of, and we will try to supply you with
your lift model parts breakdown if requested to help you determine the
correct parts you want... we're here to help you.
Heavy Duty
Adapter fits 2-3/8 inch diameter nesting hole
$75.00
Delivered
B12062-12
(Works with extension
kit kit below)
Universal Frame
Engaging Truck Adapter Set
For
10K and 12K Challenger 2-Post Lifts
That
Have Nesting Arm Adapters
$298.00
Delivered
10318
(Works with extension
kit kit below)
NEW
Style Truck Adapter Extension Kit For
Challenger Lifts With Nesting Style Adapters Like Above
INCLUDES
• (4) 3” Stack
Adapters
• (2) 6” Stack
Adapters
• (2) Organizer Racks (withmounting
hardware)
NOTE: Adapters
have a 1-1/2 inch long nesting pin with 2-3/8 pin diameter that fits into lift
arm
Sale
on our brand adapter kit for Challenger Lifts
$289.00
$225.00 Delivered
Our
version of the 10315 kit
ORIGINAL EQUIPMENT CHALLENGER Adapter Kit
$289.00
$269.00 Delivered
OEM
10315 kit
2
Six Inch
Extensions (only, no organizer racks or other adapters) $115.00 Delivered
4
Three Inch
Extensions (only, no organizer racks or other adapters)
$160.00 Delivered
Challenger
#A1104 Replacement Rubber Pads
SET OF FOUR
PADS $49.00 Delivered
(4"
X 4" Square with 1/4-20 studs) For CL-9, CL-10, VS10 & E10 Model
Lifts
Challenger
Replacement Spin-up Adapter For CL-9 and CL-10 Lifts
$49.79 each Delivered
1-3/8
x 6 Thread Size A1100 Adapter Has
4" X 5" rectangular top includes the square
replaceable rubber pad (Pad
A1104 Above)
Height
Extensions for spin-up flat metal adapter (like above)
Slip-on FIXED
Height
Extensions
For Challenger
Lifts with 4 X 4 Square Pads
CL-9,
Early CL-10, Early VS10 or E10 lifts
Includes The
Replaceable 4 X 4 Flat Rubber Pads
FOUR
10
inch
$219.00
for SET OF FOUR DELIVERED
TWO 10 inch
$155.00
for SET OF TWO DELIVERED
Challenger Luxury
Car Adapters
Special lifting pads to accommodate luxury vehicles. Pads slip over female portion of swing arm and can be adjusted to reach dedicated pick-up points on vehicle.
Fits Challenger
30000, 31000, 33000, 35000, 39000 and ALL CL Models
or 11" Height
Extension for Challenger Low-Pressure In-Ground Lifts
$1
25.00 For TWO of
them Delivered 9 inch height
Extensions with rubber pads available too. Call 866-452-4563
All
Major Brands - Adjustable
Height
Extensions
4"
to 6" Slip-On
"Spin-Up Adjustable Height" Extensions
(Shown in raised and
lowered position)
This style
is available for many model lifts, pad
shape will vary
according to lift model they are for. Pad description
is shown at Shopping Cart button.
This
height adapter has a 4 to 6 inch adjustable height
SALE
$20.00 OFF!
Set
of Four (4) for $269.00 Delivered
CHALLENGER
or AMMCO LIFTS (6 X 6 top as four corners turned up)
4 to 6 inch
adjustable height
FORWARD
LIFTS (5-3/8 X 5-3/8 Top has four corners turned up with 2 bolt holes)
4 to 6 inch adjustable
height
ALM LIFTS
(6-1/4 round top has flat round pads)
NUSSBAUM,
FORCE or PHOENIX
LIFTS (Has flat round pads)
GILBARCO
LIFTS (Pad has 4
corners turned up)
4 to 6 inch adjustable height
GLOBE
LIFTS (Has
flat rectangular pad)
4 to 6 inch adjustable height
EAGLE
LIFTS (Pad
has four corners
turned up)
ALSO
AVAILABLE IN 6 TO 9 INCH ADJUSTABLE HEIGHT
SALE
$10.00 OFF!
$279.00
Delivered
CHALLENGER
or AMMCO LIFTS (6 X 6 top as four corners turned up)
6
to 9 inch adjustable height
FORWARD LIFTS (5-3/8 X 5-3/8 Top has four corners turned up with 2 bolt holes)
6
to 9 inch adjustable height
ALM LIFTS
(6-1/4 round top has flat round pads)6
to 9 inch adjustable height
NUSSBAUM,
FORCE or PHOENIX LIFTS
(Has flat round pads)6
to 9
inch adjustable height
GILBARCO
LIFTS
(Pad has 4
corners turned up)
6
to 9 inch adjustable height
GLOBE
LIFTS (Has
flat rectangular pad)
6
to 9 inch adjustable height
Round
Top Spin-Up Adapter with Rubber Pad
Protects
Vehicle Undercoating From Steel Pad Damage
Use On any Lift With
Thread-Up Style Adapters
Complete
With Replaceable 6-1/4 inch Diameter Slip-On Style Rubber Pad
$59.00 Each Delivered
Call
866-452-4563 with "BH" part number from list
below.
Or Call
Toll-Free 1-866-452-4563 between 9 AM & 5 PM (Central
Time) Mon. thru Fri. and we will get your Quote or
information to you ASAP! If the lines are full, or we're away on service
calls, leave a message we'll call
you back!
GLOBE Lift
Rubber Pads & Adapters
Globe Rectangular Replacement Rubber Pad Set of Four
Set
of Four $73.50 Delivered!
Globe & FORD SMITH Round Replacement Rubber Pad
Set
of Four
Also fits some Ford-Smith
Lifts
Set
of Four $74.85 Delivered!
Globe 4-3/4 Square Rubber Pads
For GV series Globe Lifts
4-3/4 square and 3/8 inch thick with four holes
for mounting
Four Pads $67.00 Delivered
Globe 4-1/2 Square Rubber Pads
For Ford Smith Globe
4-1/2 inch square and 1
inch thick
Four Pads
$87.00 Delivered
For GLOBE LIFT
9 Inch Height
Adapter For Flip-Up Adapters
Slip On Height
Adapters For GLOBE
Set of Four
9 inch
adapters
$189.00
Delivered
GLOBE In-Ground Lift Replacement Sleeve &
Flip-Up Adapter Pad Assembly
Pad Has "GLOBE" name cast onto
it
Fits on 6
Inch Wide X 1-1/2 Inch Thick Arm
Sleeve
& Adapter With 17-1/2 Inch Length Sleeve $240.00
Delivered
17-1/2
inch sleeve
Sleeve
& Adapter With
22-1/4 Inch Length Sleeve $280.00
Delivered
22
1/4 inch sleeve
Globe
Arm Wear Washers for In-Ground lifts.
Fit
between lift arm and superstructure,
made from polypropylene.
Should be greased when installing.
$59.00
for set of 4
For
GLOBE Lifts
Fixed Height Extension. Fixed
at 8-1/2 inch height.
5-1/2 in square top
with rubber pad, mounted on a 2-1/2 inch pipe.
Set
of four adapters.
$219.00 For Set of Four
Delivered
GLOBE Lifts
For
GLOBE Lifts
Adjustable Height
Extension. Adapter has 5-1/2 in square top
with rubber pad, on 1-1/4 thread adjusts from 7 to 10 inches.
Set of four adapters.
$249.00 For Set of Four
Delivered
GLOBE
Lifts
GLOBE Surface
lift arms, pins, sleeves & other parts are also available
Free
UPS Ground Shipping To Lower 48 States, Contact us for
Alaska & Hawaii shipping. Note: UPS will not ship to
P.O. Boxes (Overnight shipping available too, contact us
for overnight shipping quote.)
Nesting
Style Extensions
1-1/8
diameter available too used on Mohawk Lifts.
NESTING "PIN" Portion Of Shaft Available In These Diameters.
1-1/4, 1-3/8 & 1-1/2
3
inch height extension with 1-1/4 inch diameter pin
$36.00 Delivered
3 inch 1-1/4
4
inch height extension with 1-1/4 inch diameter pin
$44.00 Delivered
4
inch 1-1/4
6
inch height extension with 1-1/4 inch diameter pin
$45.00 Delivered
6
inch 1-1/4
3
inch height extension with 1-3/8 inch diameter pin
$37.00 Delivered
3
inch 1-3/8
4
inch height extension with 1-3/8 inch diameter pin
$44.00 Delivered
4
inch 1-3/8
6
inch height extension with 1-3/8 inch diameter pin
$45.00 Delivered
6
inch 1-3/8
3
inch height extension with 1-1/2 inch diameter pin
$40.00 Delivered
3
inch 1-1/2
4
inch height extension with 1-1/2 inch diameter pin
$44.00 Delivered
4
inch 1-1/2
5
inch height extension with 1-1/2 inch diameter pin
$45.00 Delivered
5
inch 1-1/2
6
inch height extension with 1-1/2 inch diameter pin
$46.00 Delivered
6
inch 1-1/2
7
inch height extension with 1-1/2 inch diameter pin
$49.00 Delivered
7
inch 1-1/2
6
inch height extension with 2 inch diameter pin $72.00 Delivered
6
inch long 2 inch diameter
Rubber
Replacement
Pads for
Nussbaum,
HYDRA-Lift
or
Phoenix Lifts
SET
OF FOUR
$74.50 DELIVERED
Set Of Four Pads
Rubber
PADS
for
Western
Lifts
Older
Grand Lifts,
Older
Worth,
Older
Eagle Lifts,
American Lifts
Please
check
your measurements...
4
inch X 4-1/2 inch (3/4 to 1 inch thick)
Fits
on 3-1/2 inch X 4 inch steel plate
Sold
in set of four pads for
$79.00
Delivered
Set of four Pads $79.00
Multi-Position
Adjustable Height
(It is
recommended to replace both sleeves on the same side to
insure uniform height levels when using flip-up height
adapters)
In-Ground
Lift Four
Position
flip-up pad adapter & sleeve assembly
17.5 inch
long sleeve
This
will
fit
any 1-1/2" thick X
6" wide steel arm.
Each
Only $198.50 Delivered!
Flip-up
adapter has 4 height adjustment levels- Highest height
7-1/4" high, Middle height is 4" high, While
lowest height is 1-1/2" high.
Same
sleeve and adapter as above, only with 22 inch long sleeve
Each
only $220.00 Delivered
22 In. Sleeve
Gilbarco
/ Manitowoc Surface Lift Height Adapters
Gilbarco
ATF Series Rubber
Replacement Pad For Old
Style Threaded Adapter, (Rectangular Pad that replaces
the old two piece pad that had horizontal screws
securing it to the adapter top. This new pad
clips tightly on to the top of the adapter, effectively
eliminating the use of mounting screws.)
K34314 Pads are
3" X 4-1/2"
Part
Number 7352-03/K34314
Set
Includes Four
(4) Rubber Replacement Pads.
For Use On
Imported Gilbarco
Models: ATF-70B, ATF-70, AND ATF-55.
Set
of Four Pads $89.00 Delivered
Gilbarco
Rubber
Pick-up Pad #7350-00
Kit
Number K93223
Kit Includes Four
(4) Rubber Pick-up Pads. Adapters Snap Onto Lift
Pads.
Size
is 4" x 5 1/4"
For Use On
Models: CFF-70, CFF-70N, CFF-70S, CFF-90, CFF-10,000, CBT-70, CBT-90, AND CL-9000.
Set
of Four $139.00 Delivered
Slip-On
Height Extension for Gilbarco Surface Mount Lift
Has
6" Height Extension, Rubber Pad
Included. Pick style you need from list below.
Set
Of 4 $198.50
Delivered
For
Gilbarco That Has Square Top Pad with Four Corners
Turned Up.
For Manitowoc
that has 5 X 5 Pad with 2 bent sides and large Clip-On Style
Rubber Pad
For Manitowoc
that has small pad with 2 bent sides and small Clip-On Style
Rubber Pad
Don't
see what you're looking for??
If
You Would Like Additional Information On Any Specific Product Or
Service, E-mail us
Call
Toll-Free 866-452-4563 between 9AM & 5PM
(Central Time) Mon. thru Fri. NOTE: If you get the
"phone lines are busy" message, or we are out of
the office and you get our answering machine, please be
patient and leave a message anyway and we'll get back
to you ASAP to help you out.
JOYCE
Lift Replacement Sleeve and Adapter Assembly
Manufactured
to fit Joyce Lifts
For single
post and twin post side by side lifts.
Sleeve is
15 inches long and fits 6 inch by 1-1/2 in thick arm
Call
Toll-Free 866-452-4563 between 9AM & 5PM
(Central Time) Mon. thru Fri. NOTE: If you get the
"phone lines are busy" message, or we are out of
the office and you get our answering machine, please be
patient and leave a message anyway and we'll get back
to you ASAP to help you out.
Height Extensions
& Adapters
For
ROTARY Lifts
9
inch or 11 inch Height Extensions Fit Rotary
Lifts
Height extension has 2-1/2 X
5 inch metal top with two sides bent up. Mounted on a 3/16
thick steel tubing with a 5/16 metal peg welded to bottom
to insert into existing lift adapter. Slides onto flip-up
adapter. This adapter will fit any surface
mounted or in-ground frame engaging Rotary Lift
manufactured since October 1973.
For ROTARY Lifts
Four
9 inch extensions $169.00 DeliveredSALE!
Four
11 inch extensions $189.00 Delivered SALE!
Hanger Kit For Above
Adapters. Includes 2 steel hangers that will hold 2 adapters each.
Can be mounted on Lift Column or wall for easy access & storage so they
don't get lost.
$57.00 A
Pair Delivered
Set
of 2
hangers
With Rubber Pad
Slides
onto flip-up adapter.
For ROTARY Lifts
Four
9 inch extensions with rubber pads $189.00 Delivered
Set of four 9 inch extensions
Four
11
inch extensions with rubber pads $198.00 Delivered
Hanger Kit For Above
Adapters. Includes 2 steel hangers that will hold 2 adapters each.
Can be mounted on Lift Column or wall for easy access.
$79.00 A
Pair Delivered
Set
of 2
For
ROTARY Lifts
Height
Adapters & Pads
FOR ROTARY LIFTS WITH
"FLIP-UP" ADAPTERS
ABOVE:
Adjustable height extension from 4" to 6"
comes with 4" X 5" metal top with rubber
pad. The top is mounted on a 1-1/4" thread
that adjusts inside a 2-1/2" O. D. pipe, and for
safety, the thread cannot be screwed out. The
bottom is formed from 5/16 steel and has a 5/8 pin
welded to the bottom to securely fit onto the original
Rotary lift pad.
Fits into
Rotary lift arms that have a hole in the end of them like in the linked
image. LINK
Complete with rubber pad
$136.00
Each Delivered
Replacement ROTARY Flip-Up Adapter
Parts
Click image for part comparison
DELIVERED!
High
Step FJ671-8/9755-20 $38.00 each
Low Step
FJ671-9/9755-21 $29.00 each
Adapter
Pin (Holds step adapters together) FJ671-3/9755-26 $15.75 each
COMPLETE
Flip-Up
Adapter Kit For ROTARY Includes (ABOVE
PARTS) High Step, Low Step and Pin That Holds Them
Together. Two
Different Attaching Swivel Pins Included for use with either surface lifts or
in-ground lifts. Item 9755-36-1
$59.95 Delivered
Sleeve & Adapter Assemblies
For Rotary
Lift
Click Chart
Below To Find The Size You Need
Click
Chart Above To Choose The Assembly You Need If You Need One That Has No
Shopping Cart Button, Contact Us For A Quote
FJ671 $240.00 EACH Delivered
FJ672 $255.00
EACH Delivered
FJ679 $260.00 EACH Delivered
FJ678 $260.00 EACH Delivered
Adapter
Pad For Rotary Style "Flip-Up" Adapters
(Metal Flip-Up Adapter not included)
Adapter has a 5/8 pin welded to the bottom to secure it in place on the
Rotary flip-up adapter. These are designed for Rotary style flip-up
adapters only.
Adds about 7/8 to adapter
height.
Four Pads $98.00 Delivered
4
piece kit for Rotary
One
adapter pad $30.00 DELIVERED
One
piece for Rotary
4
Replacement rubber pads
only $59.00 DELIVERED
Four
replacement rubber pads
$629.00
Original
Rotary FJ6100 Kit Includes (4) FJ696, (4) FJ697 And (4)
FJ698 Plus 2 Piece Column or Wall-Mounted Adapter
Organizer Rack Part #FJ6108.
Set
of FourNesting
style adapter for Rotary Lifts. Heavy duty
construction with replaceable rubber pad. Fixed
nesting type.
1-1/2
inch diameter nesting pin on bottom
Set
of Four $189.00
Delivered
$289.00
Per Kit
Delivered
Rotary Original MODEL #
FJ7880
Adapter Extension Kit for SPOA7-RA, SPOA9-RA,
SPOA10RA &
SL29RA models ONLY. Provides additional lifting height
when vehicles require additional clearance. For use on
front or rear to level vehicle on lift. Includes (4) 3.5-inch and (4) 5-inch adapters, mounting rack and hardware.
$376.00 Delivered
FJ6197
Original KIT consists of set of four (4) FJ6182 rubber
adapters.Spin-up nesting type. Recommended for use on 3-stage arms when lifting trucks or other
frame vehicles. They can be extended by using kit FJ7880
above.
Call Toll-Free
866-452-4563 between 9AM & 5PM (Central Time) Mon. thru Fri. NOTE: If
you get the "phone lines are busy" message, or we are out of the
office and you get our answering machine, please be patient and leave a message
anyway and we'll get back to you ASAP to help you out.
Smitty's
Equipment Sales & Service
1705
W. Armitage Court
Addison,
IL. 60101
1-630-678-9010
"Proud
Accredited Member of the Better Business Bureau"
6-2050/7793-54
Original Equipment
Challenger
Replacement Spin-up Adapter For CL-9 and CL-10 Lifts 
Old
Style Challenger
Replacement Spin-up Adapter Fits Older Challenger, VBM
Lifts & Any Others With 1-3/8 Thread
(Shown in raised and
lowered position)
5" extension for Quality Lifts
With Rubber Pad
(Metal Flip-Up Adapter not included) 
For
Single post lifts
