In-Ground Low-Pressure Hydraulic Lifts  

12,000 to 100,000 Pound Capacity Available

Fore & Aft Truck & Bus Lifts

LINK to Fore & Aft Lift Repair Parts

Two Post Fore & Aft Truck Lifts LINK

Link to Portable Heavy Duty  Four-Column Truck Lifts

 

Globe In-Ground Auto Lifts LINK

 

EPA Regulations on small underground oil tanks

"Equipment and Machinery that Contain Regulated Substances for Operational Purposes. Equipment and machinery that contain regulated substances for operational purposes, such as hydraulic lift tanks and electrical equipment, are excluded from today's regulations. These specific tank categories were deferred from regulation in the proposal, and the Agency requested comments on whether, and to what extent, these tanks should be subject to regulation under the UST program. Several responses to this request gave reasons why these tanks should not be regulated as USTs."

To see the entire 30 page regulation click here LINK

 


FINANCING AVAILABLE

FINANCING AVAILABLE CLICK HERE


 

HOME PAGE

 

 

BendPak Lifts

 

Challenger Lifts

 

Globe 

In-Ground Lifts

 

QUALITY Lifts

 

Rotary Lift Accessories

 

Portable Heavy Duty Lift

 

Fore & Aft Truck Lifts 

 

Vehicle Lift Height Adapters

 

Power Units For Lifts

 & Repair Parts

 

WORK BENCHES 

& Tool Storage

 

CHAMPION Compressors

 

Saylor-Beall Compressors

 

CHAMPION

Air Compressors

 

Filter Crushers 

& Tank Monitors

 

Lincoln Lube Equipment

 

Lincoln Hose Reels

 

Samson Lube Equipment

 

Samson Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Oil Tanks &

Distribution Kits

 

Exhaust Pipe Benders

 

Waste Oil Drains

Brake Lathes, 

Tire Machines 

& Accessories

 

Work Lights

 

 Refrigerant & Engine Coolant Servicing Equipment

 

JACKS & Other Items

 

LIFT PARTS

 

TERMS &

CONDITIONS

 

 

FORE & AFT TRUCK LIFTS

"When You're Serious About Doing Professional Repairs

Without Having To Crawl Around On The Ground..."

 

CALL 630-678-9010 

Or  

FOR A QUOTE

 


 

 

Fore & Aft Lift Power Units 

& Auxiliary Reservoir

Features:
• Low Decibel Motor
• High Output Pump
• Tamper Proof By-Pass Valve
• Several Auxiliary Reservoirs Can Be Run Off One Power Unit
• No Electrical Components Furnished By Manitowoc Lifts (Magnetic Starter, Push Button Stop-Start)
• For Use With Electric-Oil Fore & Aft Lifts Only (Or Converting Existing Air-Oil Lifts To Electric-Oil Lifts)

SV60-1 has 7-1/2 HP 230/460v  60 CYCLE electric motor all mounted on a 60 gallon oil reservoir 

with a relief valve pressure setting at 250 psi.   

 

SV-62-3 has 10HP 230/460v  60 CYCLE electric motor all mounted on a 170 gallon oil reservoir 

with a relief valve pressure setting at 350 psi. 

 

CALL FOR YOUR POWER UNIT QUOTE 630-678-9010

NEED PARTS FOR THIS STYLE POWER UNIT? CALL 630-678-9010

 


 

 

 

"Fore & Aft" Lift Parts

 

Lift Parts In Stock!   

Truck, Bus & Fleet Lift Service

For Rotary, Globe, Manitowoc, Weaver

and many other brands.

 

1-630-678-9010

 

Call for Quotes

 630-678-9010 between 

9 AM & 5 PM (Central Time)

Mon thru Fri. 

 

Delivered = Free Shipping to contiguous 48 States

 

 

 

 

 

Heavy Duty Two Post Fore & Aft Lifts 

Features:

Standard Track Length Is 12 Feet - Optional Lengths Available Up To 22 Feet
Multi-Position Remote Release Lift Locks - Optional Air Locks Available
Manually Ratcheted Front Is Standard - Optional Hydraulically Driven Front Carriage
Front Cylinder Is On Movable Trolley To Accommodate Varying Wheelbases
Floor Level Controls Allow For Operator To Check Adapter-To-Vehicle Contact
Removable/Replaceable 10-5/8 Diameter Plungers



 

Heavy Duty 24,000 Pound Capacity

 Work Horse!

24,000 lb. Capacity  2P-105

12 foot track length

10-5/8 Front & Rear Hydro Cylinders

Operates on Compressed Air over Hydraulic Oil

Oil Tank & Air & Oil Control Valves

$18,000.00 Delivered

 

The Standard lift consists of the following: 
Rear Frame complete with rear cylinder cover doors and wheel chocks. 

Heavy Duty Front & Rear 10-5/8" Diameter Hydraulic Cylinders.

All steel 12-foot front pit frame with pit covers.

Two roller axles on pit trolley for movement of cylinder assembly and adjustment to wheelbase. 

Standard manual ratchet for front cylinder movement and precise placement under the vehicle. 

Floor controls in control box extension on the passenger side of vehicle complete with 3-core oil control valve, air valve and complete steel covers. 

 

Front and rear axle engaging saddles with standard saddle axle adapters

Each cylinder is provided with a standard single flipper non-rotator/safety leg. 

Optional Fiber-glassed Hydraulic Cylinders and Oil/Air Tank add $1200.00

 

Optional 14 foot track length  $500.00

 

Call 630-678-9010 to place your order.

 

 

 

 



 

Heavy Duty Full Hydraulic

36,000 lb. Capacity 

2P-106 Med Pressure 7.5 HP 260 PSI 

 14 Foot Track Length 

 

Includes 60 Gallon capacity 7.5 HP. 208-230/460V 3PHZ power Unit

 

2P-106 with 36K capacity 

$22,400.00 Delivered

 

Model 2P-106 Weaver-style Heavy Duty Truck and Bus Lift

Two post front and rear with 10-5/8" diameter plungers. 

Axle engaging, stationary rear cylinder, moveable (adjustable) front cylinder in a pit.

 

This Lift Kit consists of the following: 
Rear Frame complete with rear cylinder cover doors and wheel chocks. 

Heavy Duty Front & Rear 10-5/8" Diameter Hydraulic Cylinders.

All steel 14-foot front pit frame with pit covers.

Two roller axles on pit trolley for movement of cylinder assembly and adjustment to wheelbase. 

Standard manual ratchet for front cylinder movement and precise placement under the vehicle. 

Floor controls in control box extension on the passenger side of vehicle complete with 3-core oil control valve, air valve and complete steel covers. 

Front and rear axle engaging saddles with standard saddle axle adapters

Each cylinder is provided with a standard single flipper non-rotator/safety leg. 
Fiber-glassed REAR Hydraulic Cylinder Included

 

 

 

Fiber-glassed Front  Hydraulic Cylinder add $500.00

Optional 16 foot track length add  $500.00

 

 

 

CALL 630-678-9010 To Place Order 

Or 

 

 


50,000 lb. total lifting capacity (25,000 lbs per plunger at 

350psi with Power Unit offered below).


 

 

Extra Heavy Duty Lifting Full Hydraulic

50,000 lb. Capacity 

 12 Foot Track Length 

High pressure 10 HP 350 PSI

10HP 230/460v  60 CYCLE, electric motor all mounted on a 170 gallon oil reservoir

with a relief valve pressure setting at 350 psi.  

 

Full Hydraulic - 50,000 lb. capacity. 

Call for quote 630-678-9010

 

Model 2P-106 Weaver-style Heavy Duty Truck and Bus Lift

Two post front and rear with 10-5/8" diameter plungers. 

Axle engaging, stationary rear cylinder, moveable (adjustable) front cylinder in a pit.

 

The Standard lift consists of the following: 
Rear Frame complete with rear cylinder cover doors and wheel chocks. 

Heavy Duty Front & Rear 10-5/8" Diameter Hydraulic Cylinders.

All steel 12-foot front pit frame with pit covers.

Two roller axles on pit trolley for movement of cylinder assembly and adjustment to wheelbase. 

Standard manual ratchet for front cylinder movement and precise placement under the vehicle. 

Floor controls in control box extension on the passenger side of vehicle complete with 3-core oil control valve, air valve and complete steel covers. 

 

Front and rear axle engaging saddles with standard saddle axle adapters

Each cylinder is provided with a standard single flipper non-rotator/safety leg. 

 

Available Options for 2P-106  LIFT: 

 

Optional Fiber-glassed Hydraulic Cylinders $850.00

Optional 14 foot track length  $500.00

Hydraulic Driver/Power Spotting system for front cylinder placement in the pit for 

the various wheelbases - Optional

 

Air remote release multi-position safety legs - 

Call for quote 630-678-9010

 

 

 

 


 

 

 

 

 

 

Super Heavy Duty Three Post Fore & Aft Lift
(Dual 10-5/8 Piston Rear)

Features:

• Standard Track Length Is 12 Feet - Other Lengths Available Up To 22 Feet
• Manual Release Lift Locks, Adding Safety And Convenience, Are Standard (Optional Air Operated Locks Available)
Manually Ratcheted Front Is Standard - (Optional Hydraulically Driven Front Carriage For Convenience)
• Front Piston-Casing Assembly Is Movable To Accommodate Varying Wheelbases
• Floor Level Controls Allow For Operator To Check For Proper Adapter-To-Vehicle Contact
• Removable/Replaceable Plungers

12 foot front frame & trolley track, manual waist height release automatic lift locks, manual ratchet drive front cylinder adjustment, quick adapter spotting devices, floor level dead-man style oil control valves, and front 10-5/8 painted hydraulic cylinder, kit has two rear 10-5/8 fiber-glassed hydraulic cylinders. Single axle front and rear superstructures and one set of standard axle adapters. Front adapters adjust from 40-1/2 to 57-1/2 width and standard rear adapters are adjustable from 24" to 49".

 

Full Hydraulic - 54,000 lb. capacity. 3P-106-DR Med Pressure 7.5 HP  Call for Quote
 

Full Hydraulic - 75,000 lb. capacity. 3P-106-DR High Pressure 10 HP   $30,000 Delivered

 

CALL 630-678-9010 

Or 

FOR A QUOTE

2P-102 2P-105-RF 2P-105-DSE 2P-202  
Choose The Model That Best Suits Your Needs 
 

Find the model you want a quote on and call us at 630-678-9010 

contact us for a competitive quote, we ship nationwide 

and also can prepare shipments for Exporting.

Custom call for details Custom call for details 2P-106-DR Custom call for details  
   
 

   

 WEAVER STYLE FORE & AFT ADAPTERS AND SADDLES

Front Cylinder Adapters    Front Cylinder Ssaddles     Rear Cylinder Adapters    Rear Cylinder Saddles

Choose and Call 630-678-9010 for your price, have the part number ready please. 

 

CALL 630-678-9010 

Or  

FOR A QUOTE


 

 

Front Cylinder Hydraulic

Supply Hose Information

Still have the original pressure hose on the front moveable cylinder for years?  

All it takes is a faulty safety latch and a broken hose to change 

someone's life forever... or possibly even end it.  

 

We have all the available parts for them, and while you're at it, check that old oil pressure hose that may be weakened from age and hanging in pit waste for 10, 15 or 20 years.

Check your "Fore & Aft" Lifts Safety Legs & Latches now, 

nothing can be more important!

Because whatever is on that end of the lift is coming down 

as fast as the oil can spray from that hose when it breaks... 

and there's no telling when it will break. 

 

Hoses tend to fail according to their own schedule, and the only way to prevent it

from happening is to check it a couple times a year & change it if it's showing 

cracks, bulges or other tell-tale signs. 

 

 

WEAVER Hydro Oil Hose 3/4" (male pipe thread) $119.00 Delivered  

   3/4" diameter hose


ROTARY Hydro Oil Hose 1" (male pipe thread) $189.00 Delivered 

1" diameter hose

 

 
 

 


Fore & Aft Truck & Bus Lift Parts

 

Rotary, Weaver, Globe, Joyce, Gilbarco, 

Manitowoc, Western and other lifts 

Just call 630-678-9010 

 

  Fore & Aft Lift Parts  

  

In-Floor Oil Valve Parts

 

 CLICK TO ENLARGE OIL VALVE PARTS IMAGE Click to Enlarge Image

CALL IF YOU CAN'T FIND WHAT YOU NEED 630-678-9010

 

 

 

STOP Those Leaky In-Floor Oil Valves! 

 

  E-Z Installation of new core, seal, gasket, boot and roll pin. 

 

Aluminum Control Core Kit (controls oil to hydro cylinder)

short stem (5-1/2 total length) 

$60.00 Delivered

  Core with short stem

 

Brass Control Core Kit (controls oil to hydro cylinder)

short stem (5-1/2 total length) 

$129.00 Delivered

  Core with short stem


 Aluminum Control Core Kit (controls oil to hydro cylinder)

long stem (7-1/2 total length) 

$69.00 Delivered

   Core with long stem


 Aluminum Directional Core Kit (controls oil to valve cores)

with short stem (5-1/2 total length) 

$117.00 Delivered

     with short stem

 

Brass Directional Core Kit  (controls oil to valve cores)

with short stem (5-1/2 total length) 

$169.00 Delivered

    with short stem


 

 Aluminum Directional Core Kit  (controls oil to valve cores)

with long stem (7-1/2 total length) 

$218.00 Delivered

    with long stem

 

 

 Brass Directional Core Kit  (controls oil to valve cores)

with long stem (7-1/2 total length) 

$259.00 Delivered

   with long stem

 

 

 


 

 

BH-9638 Steel Handle

 

Weaver Style Cylinder Control Core Oil Valve Handle

$79.75 Delivered

Control Core Handle 9638

 

Weaver Style Directional Core Oil Valve Handle with Slotted Pin

$84.50 Delivered

Directional Core Handle 9632-09

 

 


 

FF512 Aluminum Handle

 

Rotary Floor Valve Handles

 

Set of 3 Handles $115.00 Delivered

 

 


Set of 2 Handles $80.00 Delivered

 


One Handle $42.00 Delivered

 


 

 

 

Two Core Oil Valve for Rotary lifts - Has short core stems

TWO CORE VALVE  9773-49     

$919.00 Delivered

 


 

Two Core Oil Valve for Weaver Lifts - Has long core stems

$919.00 Delivered

 

 


 

Three Core Oil Valve for Rotary lifts - Has short core stems

THREE CORE VALVE 9773-50

 

$1379.00 Delivered

 


 

Three Core Oil Valve for Weaver Lifts - Has long core stems

$1379.00 Delivered

 

 

 


Trolley Axles, Ratchet Assemblies & Chain, Hoses, Tanks, Safety Legs, 

Saddles & Adapters... 

Contact us with your requirements 

and we will give you a parts quote...


 

FORE & AFT LIFT STYLE

 TROLLEY AXLE WHEELS & PARTS

 

 

 

 TROLLY CHAIN

New 26 Foot Trolley Chain

$229.00 Delivered

   

TROLLEY RATCHET PARTS AVAILABLE TOO!

 

SPECIFY WHETHER FOR ROTARY OR WEAVER STYLE LIFT

 


 

Replacement Cylinders for ALL Model Fore & Aft Lifts

 Replacement Cylinders for Fore & Aft Lifts  Front Trolley Cylinder Assembly

 

We Wave Replacement Fore & Aft Cylinder Kits!

 

Complete Hydraulic Cylinders   Call 630-678-9010 for Quote

 

 


 

Replacement Cylinders, Frames, 

Power Unit Parts, Tanks & Valves and 

 Complete New Fore & Aft Lift Kits

Contact Us For Pricing 630-678-9010

 


 

 

 

GLOBE Single Post Auto Lift 

 

LOW PRESSURE = LOW MAINTENANCE

 GLOBE FS-10 Semi-Hydraulic 

(Allow for 4 to 6 weeks build time)

 

GLOBE PAGE LINK

 

Note: Pay by Check and receive a 2% Credit

Card Processing Fee Discount

CALL 630-678-9010 and Mail the Check to the address at this LINK

 


Specifications:
Capacity: 8,000 lbs. @ 150PSI (2,000 lbs. per Adapter)
Operation: “AS” = Semi-Hydraulic
Rise: 72”
Stroke: 68”
Displacement: 26 gallons
Initial Fill: 40 gallons
Cylinder: 10-5/8” Diameter
Superstructure: Solid Steel Bolster-Style and Low Profile Swing Arms
Adapters: Ductile Iron, 4-Position Adjustable on Sliding Sleeves
Low Oil Control and Auto Lock Leg: Supplied in Accordance with ANSI B153.1 Specifications

 

Want to see more Globe In-Ground Lifts? PAGE LINK

 

 

 

 

 

 


FINANCING AVAILABLE

FINANCING AVAILABLE CLICK HERE


 

If You Would Like Additional Information On Any Specific Product On This Web page, Call  630-678-9010 between 9 AM & 4 PM (Central Time) Mon. thru Fri. and we will get your Quote or information to you ASAP!

 

 

 

Send Checks and Correspondence to our Home Office:


 

 

Smitty's Equipment Sales & Service

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010

 

 


 

 


Back To Top Of Page

All Logos, Names, Trademarks and illustrations throughout this site are the property of their respective owners.  

All the rest Copyright © 2011 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated