A
heavy-duty professional quality floor jack designed for a variety of
automotive shop uses including the day to day rigors of the tire changing
industry.
FEATURES:
Steel hydraulic block assembly includes dust seals to
prevent oil contamination.
Long, removable two piece handle.
Safety by-pass system protects pressure cylinder.
Safety overload system prevents jack from being used
beyond its rated capacity.
Heavy duty chassis for added strength and
dependability.
Dual pump piston design raises the jack to maximum
height in 10-1/2 pump strokes.
72220A $2395.00 Delivered
20 TON
Floor Jack
Jack
weighs 650 pounds
72450A $1198.00 Delivered
1/2 Ton Air/Hydraulic
Telescopic Trans Jack
$1198.00 Delivered
72500E $989.00 Delivered
1/2
Ton Telescopic Trans Jack
$989.00 Delivered
72701A $1698.00 Delivered
ONE
TON Air/Hydraulic Truck Trans Jack
FEATURES:
Air/hydraulic foot pump provides hands free operation and easy convenient lifting.
Metered pump valve provides safe lowering of load.
Fully adjustable universal saddle with adjustable arms to position the transmission.
Heavy duty chain with convenient chain tensioner secures load to saddle.
2 diameter, flash chromed, single stage ram provides added stability throughout the entire lift range.
Wide base with four 3-7/8 diameter heavy duty swivel ball bearing caster wheels provides stability and easy maneuvering.
OPTIONAL
Equipment
72001 Differential Adapter
$280.00
Delivered
72003 Fuller, Eaton, RoadRanger Adapter
$350.00 Delivered
72050D $525.00 Delivered
1/2 TON Transmission Jack
FEATURES:
Fully adjustable universal saddle with adjustable corner brackets and safety chain.
Safety by-pass system prevents damage to cylinder.
Safety overload system prevents jack from being used beyond its rated capacity.
Full 360 degree rotating pump handle operates in any position.
Flash chromed ram inhibits rust from entering the hydraulic system.
Four full-swivel ball bearing caster wheels for easy positioning.
Wide chassis for efficient load distribution and stability.
OPTIONAL
Equipment
72509
Ford 5R55W, 4R70W, 4X4N, AXOD Metric Transmission Adapter
Fits jack models 72050D, 72675, 72500E, 72550B, 72450A, and 72475.
$265.00 Delivered
72513 Ford CD4E Transmission Adapter
$289.00 Delivered
For use on Ford CD4E transmissions.
CD4E Vehicle Applications:
19942002 Mazda 626 4-cylinder
19941997 Mazda MX-6 4-cylinder
19941997 Ford Probe 4-cylinder
19952000 Ford Contour
19952000 Mercury Mystique
19952007 Ford Mondeo (up to Mondeo III 4 cylinder)
19992002 Mercury Cougar
20012007 Ford Escape
20012006 Mazda Tribute
20052007 Mercury Mariner
Long handle with 36-1/2 reach helps in
positioning jack under vehicles with low overhang.
May be stored in a vertical position.
Hand grip also works as a stand to store the
jack in a vertical position.
Compact design fits easily between tandem
wheels.
Parkerized coating on pump piston, extension
screw and extension adapters and chrome coated ram offer protection
against rust.
Removable extension screw is used with the
two 4 extension adapters (included) for added height when necessary.
Self-retracting ram eliminates manual
lowering of the jack.
5 1/4 diameter high impact composite
wheels make maneuverability easy.
Fast efficient air pump reduces lifting time
and has a built-in relief mechanism which prevents the jack from being
used beyond its maximum capacity.
Convenient push button air valve connected
to an in-line filter prohibits contaminates from entering the
air/hydraulic system.
Perfect Jack To
Have
In Your Car Trunk!
82002C $45.00 Delivered
1-1/2 Ton Scissors Jack, 13-1/4
inch lift
$45.00 Delivered
20
Ton Capacity
Pair of Truck Ramps
(10
Ton Each Ramp)
82020
20 Ton Capacity
Pair of Wide Truck Ramps
(10 Ton Each Ramp)
INTENDED USE:
Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.
FEATURES:
Handles tires with up to 16 tread widths.
Telescopic T-handle extends & lifts up
to expose wheels, easy maneuverability around the shop.
T-handle retracts for easy storage.
Perforated holes in ramps provide traction
for the tires.
Non-skid rubber base pads prevent slippage
when vehicle ascends and descends ramps.
82019
NORCO
(82020
Shown Above)
20
Ton Capacity
Pair of Truck Ramps
(10
Ton Each Ramp)
NOTE:
Model not shown has same
basic construction as model pictured above.
INTENDED
USE:
Elevates
front or rear of vehicle for access to frame and components.
Particularly
useful on vehicles with low profile or ground-effects.
FEATURES:
Handles
tires with up to 10 tread widths.
Telescopic
T-handle extends & lifts up to expose wheels, easy maneuverability
around the shop.
T-handle
retracts for easy storage.
Perforated
holes in ramps provide traction for the tires.
Non-skid
rubber base pads prevent slippage when vehicle ascends and descends ramps.
Air Lift Jacks
#
82925 2-1/2 Ton Capacity
$1189.00 Delivered
#
82920 Low Profile 2-1/2 Ton
Raises Most Vehicles From Side Or Either
End
$1189.00 Delivered
#
82950 Five Ton Capacity
#
82999 Ten Ton Capacity
Call
for Quote 866-452-4563
Clutch
Handlers
Call
for Quote 866-452-4563
WHEEL
DOLLY "HIGH-LIFT" STYLE
1/2 Ton Capacity High Lift Wheel Dolly
82302B High-Lift Wheel Dolly
For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.
Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern.
7-1/2 of side to side lift arm adjustment eliminates the trial and error method of aligning the rims lug holes with the wheel drum.
A 1,500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.
The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
A hydraulic jack tilts the lift arms to match the angle of the spindle.
Safety chain provided to secure tires and wheels to the dolly.
Maneuverability is made easy by means of two rear mounted ball bearing caster wheels.
The caster wheels include a locking mechanism which can prevent the dolly from moving.
Call
for Quote 630-678-9010
NORCO
ENGINE HOIST
FOLDABLE for
EASY STORAGE
NORCO
78106A
2,500
Lbs. Capacity
Folding Engine Crane
$1789.00
Delivered
For lifting heavy items including removal and installation
of diesel engines and often their transmissions.
(78605A
SHOWN)
NORCO
78605A
6,000
Lbs. Capacity 3 Ton Shop Crane with Electro/Hydraulic
Pump
$5989.00
Delivered
3
Ton Capacity Electric/Hydraulic Floor Crane
MODEL
78605A FEATURES:
Multiple
boom and leg extensions provide maximum stability.
Boom
swivels 10 degrees right or left if base cannot be centered under the load.
Floor
lock secures crane from moving when in use.
Includes
an Electric over Hydraulic pump requiring 115 VAC.
3
Ton Capacity Air/Hydraulic Floor Crane
$5398.00
Delivered
MODEL
78600B FEATURES:
Multiple
boom and leg extensions provide maximum stability.
Boom
swivels 10 degrees right or left if base cannot be centered under the load.
Floor
lock secures crane from moving when in use.
Includes
a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.
RANGER RSC-2TF
TWO TON SHOP CRANE
$439.00 Delivered
Designed for shops with limited space
Folds for easy storage
Heavy steel construction for maximum durability
Boom is reinforced to increase strength and eliminate flex
Includes 8-ton capacity ram
Heavy-duty steel casters for easy positioning
Front casters include a safety brake to prevent movement
Telescoping boom provides 4 positions
Includes heavy steel hook with safety latch
Wide base for maximum stability
The RSC-2TF 2-Ton Folding Shop Crane sports a 1" to 93" lifting range and features a 4-hole position boom, 8-ton capacity long-ram, 6-wheel design for added mobility and a foldable body. Quick-release ring pins make setup and teardown a snap. Heavy steel construction ensures maximum durability and the 4-position boom is reinforced, so flex isn't an issue.
THREE STAGE
TELESCOPIC
BOTTLE JACK
7 - 7 - 3 TON
STAGE CAPACITY
Low profile design in order to work in tight areas, raise fork lifts or for machinery moving
or other small clearance applications.
NORCO 76637
Sale
$389.00 Delivered
FEATURES:
. Three stage lifting ram.
. Two piece zinc plated handle.
. Prevent rust with "Parkerized" pump piston, ram and extension
screw.
. No leak "Uni-weld" construction.
. 50% safety overload factor.
. State of the art design reduces repair time.
. Longer wear life due to internally machined oil passages, smooth bearing
surfaces and close tolerances.
. Lightweight forged base provides more steel only where strength is required.
. Cold headed extension screw and release valve eliminate parts and reduce the
chances of breakage and excessive wear.
. Safety oil by-pass system prevents the ram from being overextended and
causing damage to the cylinder.
20 TON
CAPACITY BOTTLE JACK
$189.00
Each
FEATURES:
. Two piece zinc plated handle.
. Prevent rust with "Parkerized" pump piston, ram and extension
screw.
. No leak "Uni-weld" construction.
. 50% safety overload factor.
. State of the art design reduces repair time.
. Longer wear life due to internally machined oil passages, smooth bearing
surfaces and close tolerances.
. Lightweight forged base provides more steel only where strength is required.
. Cold headed extension screw and release valve eliminate parts and reduce the
chances of breakage and excessive wear.
. Safety oil by-pass system prevents the ram from being overextended and
causing damage to the cylinder.
. Carrying handles for easy transport.
NORCO Jacks
Have A Manufacturers Lifetime Warranty
Heavy Duty
Professional Jack Stands
3 Ton Capacity # 81004C
$89.00 Delivered
6 Ton Capacity # 81006D
$98.00 Delivered
12 Ton Capacity # 81012
$205.00 Delivered
Click
to see features
FEATURES:
Spring loaded pawl provides constant locking pressure
against lifting column.
Four legged base with foot pads for added strength and
a more secure footing on asphalt.
Positive lock handle cannot be disengaged until load
is off the saddle column.
Lock handle can be
used as a carrying handle.
Weight 89 pounds
UNDER
HOIST STANDS
1-1/2
TON CAPACITY
UNDER HOIST STAND
3/4
TON CAPACITY
UNDER HOIST STAND
Assists in stabilizing
& supporting a vehicle that is
raised by an in-ground or above-ground lift. Should be used
in pairs.
Weighs 48 Lbs
FEATURES:
An adjustment pin chained to the stand secures the support
column at six different height positions.
Quick adjust spin handle with thrust bearing eliminates
wear and provides ease of turning under load.
1-1/4" diameter acme threaded screw has 6-1/2"
of travel for fine adjustment.
5/8" thick rubber saddle pad.
Model 81035A
$185.00
Delivered
Designed to support vehicle components, not the
vehicle.
Ideal for exhaust system installation, shock absorber
replacement and any task which requires relieving pressure
off components. Weighs 39 Lbs.
FEATURES:
Lightweight, slender design makes handling easy, even in
close quarters.
.Quick adjust spin handle with thrust bearing eliminates
wear and provides ease of turning under load.
Pedal may be locked in vertical position for storage or
shipment.
1-1/4" diameter acme threaded screw has 26-1/4"
of travel.
Model 81033A
$148.00
Delivered
Model
LOW HEIGHT
EXTENDED HEIGHT
BASE SIZE
SADDLE SIZE
81035A
48-7/8
85-3/8
12 X 12 X 12
3-1/4 X 3-1/4
81033A
55-1/4
81-1/2
12 Inch Dia.
1-5/8 X 5-1/4
12
Ton Capacity Hand Pump Operated Shop Press
Click to enlarge image
NORCO 12 TON SHOP PRESS #78013A
$1089.00 Delivered
FEATURES:
"Parkerized" pump piston, ram & extension screw to inhibit rust from
entering the hydraulic system.
Pair of bed plates included.
Shielded heavy duty ram return springs.
Power unit is bearing mounted for horizontal movement on head
channel.
Zero distortion, heavy duty structural steel frame.
A pair of 1 x 4 x 10 long steel plates with V cutout on one edge and circle cutout on the other.
For 12, 20 and 25 ton capacity presses only. Weight: 20 lbs.
20-25
Ton Arbor Plates: Part # 78033
A pair of
heavier steel plates with V cutout on one edge and circle cutout on the other. For 12, 20 and 25 ton capacity presses only.
Weight: 28 lbs.
50
Ton Arbor Plates:
Part # 78056A
A pair
of 50 Ton steel plates for use with all 50 ton capacity presses.
Weight: 108 lbs.
Accessory Kit for 50 Ton Capacity Shop Presses
Part #78060
INCLUDES:
A. MODEL 78056A - Arbor Plates
B. MODEL 78059 - Threaded Adapter
C. MODEL 78061 - Ram Cap
D. MODEL 78062 - V Pushing Adapter
E. MODEL 78063 - 1 Diameter Ram
F. MODEL 78064 - 1-1/4 Diameter Ram
G. MODEL 78066 - Bearing Puller (Dimensions) Weight: 143.5 lbs.
Bearing Puller Kit: Part #
78025 Accessory Kit
for 20 & 25 Ton Capacity
Shop Presses
INCLUDES:
A. MODEL 78033 - Arbor Plates
B. MODEL 78028 - V Pushing Adapter
C. MODEL 78029 - 3/4 Diameter Ram
D. MODEL 78031 - 1 Diameter Ram
E. MODEL 78032 - Bearing Puller (Dimensions)
Weighs 40 pounds
Hydraulic Gauge w/ Fittings:
Part # 78021 Four Inch Diameter gauge designed to work with Norco 12 & 20 ton
presses. Weight: 2 lbs
FEATURES:
4" diameter face.
Glycerin liquid filled type.
Dial indicates internal pressure (psi) & corresponding pounds of force at ram end.
Accurate within +/- 2.5%.
Standard 1/4" NPT fitting.
Air
/ Hydraulic Pump: Model # 910130 Used
with NORCO Air/Hydro Shop Presses
10,000 P.S.I.
Air Powered over Hydraulic, Foot Operated Pump without Gauge
For automotive / truck, industrial & construction jobs. The added convenience of an air motor reduces pumping time and effort to activate
single acting hydraulic cylinders.
FEATURES:
Designed to utilize exhaust air to help power the pump, requiring only 80 p.s.i. air pressure to develop 10,000 p.s.i. hydraulic pressure.
Air exhaust muffler for quieter operation.
Air and oil inlet filters for reduced risk of damage from contamination.
Designed with durable light weight, corrosion resistant plastics.
Foot pedal provides hands free pumping and release of load.
Designed to be used with a single-acting cylinder.
Internal pressure relief valve for overload protection.
Equipped with a more durable aluminum reservoir.
Comes with two different size poppit valves that can be quickly and easily installed.
Poppit valves reduce the return flow of oil back to the pumps reservoir providing a safer controlled lowering of load.
NORCO Power
Train Lift Table With 2,500 Pound Capacity
INTENDED
USE:
This lift table handles power train components like engines and their
transmissions, engines with transaxle assemblies, rear ends and large
electric vehicle batteries. It will also serve as a work table where
components can be lowered to a convenient work height for repairs.
Model
72850
FEATURES:
. An air/hydraulic foot pump includes a metered valve for safe lowering of
the load.
. Five foot extension hose with quick disconnect fittings stores in the lift
base. The foot pump can be removed from its holder and hydraulic hose
quickly and easily extended using the extension hose. This provides
hands free operation of the pump anywhere around the lift's perimeter.
. Scissors lift design provides easy 360 to any component.
. Two heavy duty ratchet tie-downs are included to safely secure the load on
the lift table.
. Table top height from 31" to 80-1/2".
. Four 8" diameter swivel caster wheels for easy maneuverability. Front
wheels can be locked in position for steering. Rear wheels can be locked to
prevent the lift from rolling.
Weighs 665 Lbs.
$3995.00 Delivered!
Larger Heavier Items Allow
Approximately Two Weeks For Free Delivery
JACKS
From Quality Lift Company
1/2 Ton Hydraulic Transmission Jack
Professional transmission repair jack.
Foot pedal hydraulic manual operation.
2 stage telescoping for rise heights of 34-1/4" to 73-5/8".
Built and tested to ANSI standards.
Fully adjustable saddle.
Wide base for stability.
Weight: 229 lb
SALE!
QTJ01N $489.00 Delivered
1/2 Ton Air/Hydraulic
Transmission Jack
Professional transmission jack.
Air operation & foot pedal manual operation for ease of use.
2-stage telescopic jack for rise heights of 34-1/4" to 73-5/8"
Built and tested to ANSI standards
Fully adjustable saddle
Wide base for stability
Weight: 231 lb
QTJ01A
$579.00 Delivered
22 Ton Mobil Air/Hydraulic Bottle Jack
Professional Heavy Duty Floor Jack.
Built and tested to ANSI standards.
Safety relief valve to prevent overload.
Self-retracting springs for fast ram retraction.
Adjustable screw and adapters for height adjustment (standard).
Lifting height 9" - 17".
Working air pressure 90-145 psi.
Weight: 117 lb
QFJ144A
No Longer Available
3 Ton Quick Lift Floor Jack
Professional grade automotive service jack.
Double pump for quick action rise.
Built and tested to ANSI standards.
Lifting height from 4.8" to 21".
Safety relief valve to prevent overloading.
Weight: 104 lb
QFJ06D
$239.00 Delivered
3 Ton Professional Jack Stands
Professional grade jack stands.
Built and tested to ANSI standards.
Range 12.4" to 17.7".
2 per set.
Weight: 22 lb
QJS06N
$79.00 Delivered
American
Made!
GRAY
TRANSMISSION JACK
Model HTJ-1000
Hi-Rise Transmission Jack 1/2 Ton (1,000-lb) capacity
$1798.00
Delivered!
The #1 choice of the professional automotive transmission repair shops. The HTJ-1000 has proven to be a leader by contributing years of trouble-free service and unsurpassed quality. The unique two-stage design has been an asset to many technicians allowing them complete control of the jack during installation and removal of transmissions. Used exclusively by some of the largest transmission repair facilities, Gray's model HTJ-1000 will definitely become the most popular transmission jack used in your shop!
Unique design...Gray's two-stage air and hydraulic design combines the power, speed, precision and durability demanded by the professionals.
User friendly...first-stage foot pedal controls, ratcheting head brackets and fore/aft tilt provides precise adjustments.
Powerful...1,000-lb capacity
Reliable...a time proven hydraulic system insures years of trouble free service.
Exact control...of transmission with high degree of forward tilt of 50°, rear tilt of 20° and side tilt of 10° adjustments.
Smooth maneuverability...four high quality 4" diameter swiveling casters.
Rugged "Nylon Speed Strap" provided...quickly secures the load
Missouri and Illinois purchases
local sales tax applies.
Model #90 Adapter
Use with HTJ/TJ-1000
$459.00
Delivered
This set of 4 adapters are designed for the vehicles where the exhaust passes right next to the transmission pan prohibiting easy removal of this type of transmissions. The 90° adapters are designed to work in conjunction with Grays model HTJ-1000 and TJ-1000 transmission jacks. Simply slide the adapter on the existing head plate ratcheting brackets and stabilize the transmission under the lip of the transmission pan with ease.
Model #45 Adapter
Use with HTJ/TJ-1000
$449.00
Delivered
This set of 4 ratcheting brackets stabilize the irregular-shaped transmission pans allowing one-person removal and installation. This adapters work in conjunction with Grays model HTJ-1000 and TJ-1000 automotive transmission jacks. Simply slide the adapter on the ratcheting bracket on the jack head and prevent any unnecessary blocking.
Model Adapter Kit (multipurpose)
Multi-Purpose, Use with HTJ/TJ-1000
$449.00
Delivered
This multipurpose adapter kit enables the technician to remove transmission and transfer case as one unit and allows easy removal of front wheel drive transaxles.
Model 4T80E Adapter
Use with HTJ/TJ-1000
$315.00
Delivered
Designed to stabilize awkward transmissions with only one mechanic by connecting this adapter to the side of the transmission in the provided bolt hole pattern.
GRAY Model HTCJ-2000 (Heavy Duty
Component Handler)
Heavy Duty Hi-Rise Transmission Jack
More than just the average
transmission jack...Gray's model HTCJ-2000 enables the technician the
flexibility of handling a wide array of components including power dividers,
differentials, axle assemblies, auxiliary boxes, as well as, the many awkward
transmissions on the market today.
CALL FOR QUOTE
630-678-9010
Low starting height of 30" - easily remove jack from underneath four post lifts with a component on the jack
High lift height of 72" -
works underneath mobile column lifts
Short
height mobile column automotive lift support stand for 16,000 lb. capacity
lifts, adjusts from 21.5" to 31.5"
Short
height mobile column automotive lift support stand for 16,000 lb. capacity
lifts, adjusts from 31.5" to 41.25"
Short
height mobile column automotive lift support stand for 16,000 lb. capacity
lifts, adjusts from 51.25" to 78.75"
CLM-AB-18
Jack Stand
Short
height mobile column automotive lift support stand for 18,000 lb. capacity
lifts, adjusts from 21.5" to 31.5"
Short
height mobile column automotive lift support stand for 18,000 lb. capacity
lifts, adjusts from 31.5" to 41.25"
Short
height mobile column automotive lift support stand for 18,000 lb. capacity
lifts, adjusts from 51.25" to 78.75"
Call
for Quote 630-678-9010
Ranger
Vehicle Dolly RCD-1V
5150408
This dolly system is a mobile vehicle stand that conveniently frees your work bay and your hands. A safer and cost efficient alternative to floor jacks, the RCD-1V vehicle dolly will increase productivity without breaking your budget. Its sturdy ball bearing swivel casters allow you to place a disassembled drive train, chassis or body anywhere in the shop while it awaits parts. Tires on or off, the RCD-1V easily adapts to most makes and models. Height and width adjustable.
Ideal for moving dismantled
vehicles
Includes saddles for easy
alignment
Use as single unit or in pairs
Lifting capacity:
1,500 lbs.
Overall height:
12"
Width adjust:
40" - 59"
Caster size:
4-1/2"
Dimensions:
52" x 24" x 14"
Shipping weight:
90 lbs.
Shipping dimensions:
49" x 9" x 5"
One
Dolly $198.00
Delivered
Ranger
Vehicle Dolly RCD-1TD
5150190
The RCD-1TD Low Profile Automobile Carts maneuver around the shop with ease on four 3-1/2" steel ball bearing casters. Each dolly can hold up to 1,000 lbs., so you know it can handle whatever you've got. Push cars, boats or just about any vehicle in all directions. Keep your garage organized so that it operates at optimum efficiency.
Sold in pairs
Perfect for moving disabled vehicles
Swivel casters allows operator to move vehicles in all directions
Deep wheel wells keep vehicles secure
3-1/2" cast iron ball bearing casters
Sturdy welded steel construction
Capacity: 1,000 lbs. (each)
Dimensions: 15-1/2" x 23-1/2"
Shipping weight: 46 lbs.
Shipping dimensions: 26" x 17" x 6"
Set
of Two $138.00
Delivered
Order Any Item
From Our Website Or By Phone,Call
630-678-9010
GRAY JACK LIFETIME WARRANTY
Gray warrants to the original purchaser that the Gray product meets Gray's standard specifications for the product at the time of purchase, and will be free from defects in materials and workmanship for the normal useful life of the product subject to the terms, conditions and exclusions herein.
VALUE ADDED PROTECTION
Gray products are warranted against excessive or abnormal wear and tear for a period of one (1) year from the date of purchase by the original purchaser. This limited warranty period stops at the end of the one year warranty period or upon the date Gray product is no longer owned by the original purchaser, which ever shall first occur and subject to the terms, conditions and exclusions herein.
TERMS AND CONDITIONS
The limited warranties are subject to the following terms, conditions and exclusions:
The warranties do not cover any product or part that has been subjected to conditions other than normal wear and tear. These conditions may include but not limited to, the following: abused, contaminated, corroded, modified, heated, damaged, neglected products or parts, or products or parts subjected to unforeseen natural disasters such as, but not limited to war, flood, tornado, hurricane, wind or hail storm damage or the like. In the event of any alteration, modification, abuse or misuse of this product or if this product is used for a purpose other than for which it was intended, or used in a manner inconsistent with any instructions regarding its use, the limited warranties shall be void.
The sole and exclusive remedy shall be the repair or replacement of the defective or excessively worn product or part, at Gray's option. All transportation charges shall be paid by the purchaser. Warranty claims must be made in writing to Gray Manufacturing Company, Inc. at 3501 S. Leonard Road, St. Joseph, MO 64503, model number and serial number must be included. This exclusive remedy shall not be deemed to have failed of its essential purpose so long as Gray is willing and able to repair or replace the defective product or part in the manner prescribed herein. In no event shall Gray be liable for any direct, indirect, special, incidental or consequential damages of any kind, nature or description, whether based on warranty, contact, tort, negligence, strict liability, or other legal theory.
These warranties are exclusive, and no warranty of merchantability, fitness for a particular purpose, or other warranty of any kind (whether expressed, implied or statutory) is made by Gray. No agent, employee or representative of Gray Manufacturing Company, Inc. has authority to bind Gray to any affirmation or warranty concerning Gray products or parts except as stated herein.
