Back To Home Page

 

FIND OUR WEBPAGE LINKS BELOW

 

BendPak Lifts

 

Challenger Lifts

 

Globe

In-Ground Lifts

 

Quality Lifts

 

Rotary Lift

Accessories

 

Portable Heavy Duty Lift

 

Fore & Aft 

Truck & Bus

In-Ground Lifts

 

Vehicle Lift Height Adapters & Replacement Rubber Pads

 

Power Units For Lifts & Repair Parts

 

WORK BENCHES & Tool Storage

 

CHAMPION

Air Compressor Repair Parts

 

Saylor-Beall Compressors

 

Filter Crushers & Tank Monitors

 

Lincoln Lube Equipment

 

Lincoln Hose Reels

 

Samson Lube Equipment

 

Samson Hose Reels

 

GRACO LUBE

EQUIPMENT

 

Oil Tanks & TANK GAUGES

 

Exhaust Pipe Benders

 

Waste Oil Drains

 

Brake Lathes, Tire Machines & Accessories

 

Work Lights

 

JACKS & Other Items

 

 Refrigerant & Engine Coolant Servicing Equipment

 

Assorted Lift Parts Page

 

 Official PayPal Seal

 
TERMS & CONDITIONS
 

Shipping To US Locations Only


  

Adapter Kits and Accessories For Automotive Lifts 

 

PUSH THE F5 KEY ON YOUR KEYBOARD, TO REFRESH THE WEB PAGE AND VIEW NEW ITEMS

Click Here To Visit Another Full Page Of Lift Adapters!

We accept Visa, Master Card, Discover, American Express, and PayPal

 

Order any item by phone too, 

Call 630-678-9010 

between 9 AM & 4 PM

Monday thru Friday

 

QUICK LINKS TO PAGE

 

Spotting Dishes - Click Link

 

Touch-Up-Paint - Click Link  

 


"DELIVERED" on this website, means "FREE SHIPPING"


 


 

 

 

One Dish $40.00 Delivered

 

 

 


Two Dishes $75.00 Delivered  

 

 

Original Wheel Spotting Dish Kit

For mounting on floor to use as a gauge where to spot vehicles prior to raising on lift. Floor mounting hardware included.

 Vehicles can use 3 positions, one in front of the dish, one on the dish and one behind the dish depending on the length of the vehicle.   

Each FF729 Dish Kit $40.00 Delivered  or get two for $75.00 Delivered

SIZE of spotting dish 12 inches wide X 10-1/2 inches

 

 


 

Wide Dish

Wide Spotting Dish $45.00

One Dish

      

 

 


TWO Wide Spotting Dishes

 for $80.00 

  2 wide dishes

 

This Spotting Dish is "W-I-D-E-R" and has more reach

 for easier vehicle spotting!  

     Wider so you can see it easier out the door while spotting vehicle on it.  Narrower cars fit it too while centered on the lift!

No name on it, well made H.D. STEEL, painted yellow.  

Includes Mounting Hardware.  

SIZE of spotting dish 15 inches wide  X 10-3/4 inches


 

CLICK TO ENLARGE FOR DIMENTIONS

Like above but "Duel"

 

Dual Spotting Dish

 $59.00 Each Delivered 

Yellow color like the one shown above Only Taller.

20-1/8 inches tall X 15 inches wide! 

Great for spotting long or short vehicles on a lift!

 

 


TOUCH-UP PAINT FOR ROTARY LIFTS

  Large 12 OZ. Spray Cans

 

ROTARY LIFT TOUCH-UP PAINT

Original Rotary Touch-Up Paint

 

 

 

 

 Package consists of:

2 Rotary Signal Blue Spray Cans

1 Rotary Yellow Spray Can

 

$75.00 Delivered 

 

 


 

 Package consists of:

2 Rotary Red Spray Cans

1 Rotary Yellow Spray Can

 

$75.00 Delivered 

   

 


 

 Package consists of:

1 Rotary Signal Blue Spray Can

1 Rotary Red Spray Can

1 Rotary Yellow Spray Can

 

$75.00 Delivered 

 

 


 

 Package consists of:

3 Rotary Signal Blue Spray Cans

 

$75.00 Delivered 

 

 


 

 Package consists of:

3 Rotary Red Spray Cans

 

$75.00 Delivered 

 

 


 

 Package consists of:

3 Rotary Yellow Spray Cans

 

$75.00 Delivered 

 

 


 

  

LOOKING FOR A ROTARY FJ6100? 

 

WELL, HERE'S THE SAME SET,

 FOR HUNDREDS LESS!

 

SVI'S 7533-65

 

  

 

$595.00 Delivered

 

 

Same as FJ6100 Kit,  SVI's version of (4) FJ696, (4) FJ697 and (4) FJ698 

Plus 2 Piece Column or Wall-Mounted Adapter Organizer Rack Part #FJ6108.

 All in BH-7533-65

 

 


$279.00 Per Set Delivered 

      

Four 9 Inch Height Extensions LIKE ROTARY FJ6115 

  

$279.00 Per Kit Delivered 

 

Extended Height Adapter Kit For Rotary Surface or In-ground Lift. The kit includes Four 9 Inch Height Extensions and Two Column or Wall Mount Adapter Hanger Racks. This Extended Height Adapter Kit can be used when raising certain vans or pick-ups that have running boards or uneven frames. This adapter will fit any surface mounted or in-ground frame engaging Rotary Lift manufactured since October 1973.  Manufactured to fit Rotary brand lifts.  

 


$289.00 Per Set Delivered 

      

FOUR 9 inch Adapters with rubber pads  

Made for Rotary brand lifts, hangers included

Great Price At  $289.00 Per Kit Delivered


 

11 in. Ext.

       

Set of Four 11 inch extensions with storage hangers

For Rotary Lifts with flip-up adapters 

Same as FJ6195

 SALE! $279.00 Delivered


Four 11 inch extensions

with rubber pads  

 

       

 

11 inch extensions for Rotary, but with rubber pads on top 

of each extension, Hanger brackets Included

Set of Four is $289.00  Delivered

 

 


"DELIVERED" on this website, means "FREE SHIPPING"


 

 

 

 

 7500-90 - FJ6137

 $439.00 Per Kit

  Delivered

 

(Replacement Rubber Pad Below)

 

Mini-Van Adapter Kit For Rotary Lifts   

Mini-Van Adapter Kit is required for safely raising mini-vans with running boards (Caravan, Aerostar, Astro, Voyager) and features an adjustable range between 4-7/8 in to 6-3/4 in additional height. This adapter fits any frame engaging surface mount or in-ground lift manufactured by Rotary Lift since October 1973. Includes four (4) Adapters and a 2 piece wall mount or column mount adapter rack. 

Replacement Pads

Fits on FJ7859 adapter insert #FJ7864-3 

AND ON FJ6137 Above

 

FJ7735-2 SET OF FOUR - FREE SHIPPING  FJ7735-2 

 

5L X 3-1/2W X 1-3/8H

SET of 4 Pads $129.00 Delivered

 

 

 


 

 $269.00 Per Kit

Delivered

 2-1/2 in Step Polymer Pad Adapter Kit FJ6139   2-1/2 in Step Polymer Pad Adapter Kit provides an additional 2-1/2 in of clearance. The adapter will fit any frame engaging surface or in-ground Rotary Lift manufactured since October 1973. This kit includes four (4) FJ698 Adapters and a 2 piece column or wall mount adapter rack.  

 


 

$269.00 Per Kit

Delivered

  
1 inch Step Polymer Pad Adapter Kit

  FJ6190   1 inch Step Polymer Pad Adapter Kit provides an additional 1 in of clearance. The adapter will fit any frame engaging surface or in-ground Rotary Lift manufactured since October 1973. This kit includes four (4) FJ6189 Adapters and a 2 piece column or wall mount adapter rack. 

 


Complete Low Profile 3-Stage Nesting Adapter For Rotary 10K Lifts FJ6202

Fits into Rotary lift arms that have a hole in the end of them like in the linked image. LINK

 

 

FJ6202 Complete with rubber pad

 

$149.00 Each Delivered  

   


FJ6202

 

SET Of FOUR Rotary # FJ6202

FJ6225 Adapter Kit

$419.00 Delivered

 


 

 Rubber Adapter Pad For Rotary Style "Flip-Up" Adapters

Rubber Adapter Pads For Rotary Flip-Up Adapters Protect Undercoating

This height extension adapter has a 4" X 5" rectangular top formed from heavy steel plate, with a replaceable rubber pad so it can be repaired if worn down for half the cost of replacing the whole unit.  Adapter has a 5/8 pin welded to the bottom to secure it in place on the Rotary flip-up adapter.  These are designed for Rotary style flip-up adapters only.  Intended more as a protective rubber pad assembly to protect under coating rather than a height extension. 

 

Adds about 7/8 to adapter height.

Four Pads $159.00 Delivered    

   4 piece kit for Rotary Steel Flip-Up Adapter Pads


 

For ROTARY Lifts

Height Adapters & Pads

FOR ROTARY LIFTS WITH "FLIP-UP" ADAPTERS

ABOVE: Adjustable height extension from 4" to 6" comes with 4" X 5" metal top with rubber pad.  The top is mounted on a 1-1/4" thread that adjusts inside a 2-1/2" O. D. pipe, and for safety, the thread cannot be screwed out.  The bottom is formed from 5/16 steel and has a 5/8 pin welded to the bottom to securely fit onto the original Rotary lift pad. 

  SET OF 4  $289.00 Delivered 

     

 


 

 $259.00 Per Kit

Delivered

1/2 inch Polymer Pad Adapter Kit 

FJ6138   1/2 inch Step Polymer Pad Adapter Kit provides an additional 1/2 in. of clearance. The adapter will fit any frame engaging surface or in-ground Rotary Lift manufactured since October 1973. 

This kit includes four (4) FJ697 Adapters and a 2 piece column or wall mount adapter rack.  

 


 

BH-7536-90_FJ7880

2  Inch Pin Diameter

  MODEL # FJ7880 Adapter Extension Kit  

For SPOA7-RA, SPOA9-RA, SPOA10RA & SL29RA models  ONLY!  

Provides additional lifting height when vehicles require additional clearance. 

For use on front or rear to level vehicle on lift.   2 inch pin diameter

Includes (4) 3.5-inch and (4) 5-inch adapters, mounting rack and hardware.

(FJ7880 kit weighs 40 pounds)

 

   $339.00 Per Kit 

Delivered

 


NOTICE: Some OLDER Rotary SPO12 lifts have a 1.5 inch diameter hole on the end of the arms. Make sure you measure the diameter of the "Nesting Hole" on the arm before you purchase the extensions for your lift. 


 

 

 

 

Rotary Adjustable Spin-Up Style Nesting Adapter

2 inch pin diameter

$412.00 Delivered  

    FJ6197

 

For 10,000 Pound Capacity 

Rotary Lifts

FJ6197 KIT consists of set of four (4) FJ6182 adapters. Recommended for use on 3-stage arms when lifting trucks or other frame vehicles. 

Additional height extended by using kit FJ7880 shown above


 

Replacement Rubber Pads

With Screws

Set Of 4 Pads $54.00 Delivered 

 

 

Thread-Up Adapter Kits


Auxiliary adjustable thread-up adapter with rubber pads allow
for protection of underbody vehicle components or undercoating. For raising certain vans or pickups.

  2 inch pin diameter

Fits Rotary Lift models:

SPOA7-RA, SPOA9-RA, SL210-RA, A8-RA, A10-RA 

and SL210-RA ONLY.


  Model# FJ6197  for 10,000 lbs. capacity lifts. 

includes (4) FJ6182 adapters

 

 

 

 

 

Adapter Kit for Rotary 12,000+ lb. capacity lifts

KIT number FJ6200 for SPO12-10 series lifts, SPO15 and
SPO18 model lifts. includes (4) FJ6201 adapters

$525.00 Delivered

  FJ6200

 

 

 

 

      


       Need a single adapter similar to above?

                                           

                     

 

             Frame Engaging Adapter For Rotary Lifts

               Same as FJ6182 has 2" diameter pin

 

Each $129.00 Delivered

 

 

Auxiliary adjustable thread-up adapter with rubber pads allow
for protection of underbody vehicle components or undercoating. For raising certain vans or pickups.

 


Replacement Rubber Pads

With Screws

Set Of 4 Pads $54.00 Delivered 

 

 

 

 

FOR ROTARY LIFTS WITH 

1.5 INCH PIN DIAMETER

Solid Steel Extension

 

Measure the hole on the end of your

 lift's arm to check the size of

 the pin you need

 

FJ6180 / SDI-124-3

 

1.5 Inch Pin Diameter for Old Style SPO12 

 

 3 Adapter Extension for SPO12-(10, 300, 400 and 500 Series).

$67.00 EACH Delivered 

 

Two 3 inch Extensions $125.00 Delivered 


 

6 Inch Height Extension with 1.5 inch pin

 

Replacement 6 Adapter $75.00 Each Delivered 

 

 


 

FJ6144 / SDI-124-8 

 

1.5 Inch Pin Diameter 

 

 8 Adapter Extension for SPO12-(10, 300, 400 and 500 Series).

$89.00 EACH Delivered 


Two of the 8" Extensions $165.00 Delivered 


 

2 - 3/4 Inch Pin Diameter 

FJ7822-4  / 7536-53 

 

2.75 Inch Pin Diameter for SPO15 & SPO18 

 

 5 Aluminum Adapter Extension for SPO15 & SPO18

 

$189.00 EACH Delivered 


2 - 3/4 Inch Pin Diameter 

 

FJ7822-5  / 7536-54

 

2.75 Inch Pin Diameter for SPO15 & SPO18 

 

 10  Aluminum Adapter Extension for SPO15 & SPO18 

$259.00 EACH Delivered 

 


 

 

 

 

1.5" Diameter pin

Set of Four Nesting style adapter for Lifts with 1.5 inch diameter nesting holes. 

Heavy duty construction with replaceable rubber pad. Fixed nesting type.

1-1/2 inch diameter nesting pin on bottom

 

Set of Four Adapter Pads 

$196.00 Delivered 

 

 

 

One Adapter Pad 

$56.00 Delivered 

 


Replacement Rubber Pads

(with screws)

Set Of 4 Pads $54.00 Delivered 

 

 


 

 

FJ6200

Set of Four (4) FJ6201 Thread-Up Style Adapters

 For SPO12 (-10, 300, 400 and 500 Series). 

 

$519.00 Delivered 

  Click Here To Visit Another Full Page Of Lift Adapters For More Great Deals!   


 

NEW Lift Superstructures

For ROTARY "DTO" Low-Pressure

In-Ground 2-Post Low-Pressure Lifts Only!

(That have 8.5 Pistons and 

"I" Beam Equalizer System)

 

 Replacement Superstructures 

 

 

For Twin-Post Rotary Low-Pressure

In-Ground Lifts that need complete new Arms,

Superstructures & Flip-Up Style Adapters.

 

$2597.00 Delivered

 

FJ5208 for Rectangular Piston Bolt Pattern 

or

FJ5207 for Square Piston Bolt Pattern

 


 

 

FA5191 Tool Holder - Keeps air guns, torque sticks and other tools within reach. 

 

Can be used on any Brand Lift, and Mounts easily in holes already 

pre-drilled and tapped in the column on Rotary Lift two-post lifts.

 

 

 

$89.00 Delivered

 

 


If You Would Like Additional Information On Any Specific Product Or Service, Call  630-678-9010 between 9 AM & 3 PM (Central Time) weekdays and we will get your Quote or information to you ASAP!

 

 

 

 

Vehicle Door Protection

 

DoorjammerPRO is preferred in top end shops across the country. This thick pad is made of specially molded, impact resistant, polyurethane foam. 

18 inch wide outside dimension

13.5 inch wide inside dimension

24 inches Tall                        

(Fits most lift carriages & can be cut in half or trimmed to fit the others)

This pad can also be custom screen printed with your shop logo or favorite slogan. 

DoorjammerPRO is the hands down favorite in custom rod and specialty shops and top new car dealerships.

 

Set of Two $159.00 Delivered 

 

Delivered!

 


For 2 Post Lifts

 

Surface Lift Power Station 

 In Red, BLUE or Black

SALE! $259.00 Delivered 

RED Power Station

BLUE Power Station

Black Power Station

Four 20 Amp GFCI protected electrical outlets mounted above the F.R.L. to prevent moisture problems. (Like the water problems that are associated with some other brand units that have the electrical receptacles on them mounted below the F.R.L)  This Power Station Air System provides both filtered / lubricated air and filtered / non-lubricated air outlets. One for tire inflation and blow guns and one lubricated outlet for pneumatic tool lubrication purposes.


 

Order Any Item From Our Website Or By Phone, Call 630-678-9010 Between 9AM and 5PM Mon thru Fri 

Removable Work Steps / Set of 2 Part Number FC5378 
 

 

Rotary Original Drive-Thru Ramp Kit S100030   For Rotary Revolution Lift Only. Drive-Thru Ramp Kit includes 2 additional ramps to give the lift a drive thru capability.  

 

See Image Above 

Rotary Original Extended Ramp Kit S100029   For Rotary Revolution Lift Only. Rotary Extended Ramp Kit reduces the on-ramp up angle for vehicles with low ground clearance. (Includes 2 ramps) 

 

See Image Above

Rotary Original Aluminum Extended Ramps S100047  For Rotary Revolution Lift Only. Rotary Aluminum Extended Ramps reduces the on-ramp up angle for vehicles with low ground clearance. (Includes 2 ramps) 

 

FOR AR123, AR40, AR55, ARO123, QL4P,SM123, SM40, SMO123 AND OTHERS

Complete Single Reinforced Steel Ramp Assembly 

Will Replace One Runway Ramp. $659.00 Each Delivered 

Kit Includes: one heavy duty reinforced ramp, hinge pin, yellow chock slide, hardware.

 

 

FINANCING AVAILABLE

FINANCING AVAILABLE CLICK HERE

 

 

 

FINANCING AVAILABLE

FINANCING AVAILABLE CLICK HERE


 

Back To Top Of Page

 

 

 

Smitty's Equipment Sales

1433 W. Fullerton Avenue, Unit G

Addison, IL. 60101

1-630-678-9010

 

"Accredited Member of the Better Business Bureau"

 

 

All Logos, Names and Trademarks and illustrations throughout this site are the  property of their respective owners.  All the rest Copyright 2006 by Smitty's Equipment Service, Division of Blizzard Wizzard's Snowplowing Incorporated